# 圧力単位換算

> タイヤ、気象、血圧の測定値について、psi から bar、bar から psi、kPa、atm、hPa、mmHg、inHg に換算し、正確な換算係数の連鎖を示します。

操作できるページ：https://www.calcopenly.com/ja/conversion/pressure-converter
分野：単位換算ツール

Each pressure unit is a fixed number of pascals (newtons per square metre). The bar is exactly 100,000 Pa, the standard atmosphere 101,325 Pa and the torr 1/760 atm. The psi, one pound-force per square inch, is about 6,894.757 Pa, fixed exactly by the 1959 pound, standard gravity (9.80665 m/s²) and the 25.4 mm inch.

The default converts a 32 psi tyre pressure to 2.2063 bar. Weather maps use hectopascals (1 hPa = 1 mbar; standard sea-level pressure is 1,013.25 hPa), and blood pressure is recorded in millimetres of mercury.

Gauge and absolute readings convert with the same factor but are not interchangeable: a tyre gauge shows pressure above the surrounding air, so 32 psi on the gauge is about 46.7 psi absolute at sea level. The inch of mercury uses the conventional value at 0 °C and is marked approximate.

## 入力

- **値**: 変換元の単位で数値を入力するか、単位付きの数値を入力します
- **変換元** (選択肢：pascal (Pa), hectopascal (hPa), kilopascal (kPa), megapascal (MPa), バール, standard atmosphere (atm), pound per square inch (psi), millimetre of mercury (mmHg), torr (Torr), inch of mercury (inHg), kilogram-force per cm² (kgf/cm²))
- **変換先** (選択肢：pascal (Pa), hectopascal (hPa), kilopascal (kPa), megapascal (MPa), バール, standard atmosphere (atm), pound per square inch (psi), millimetre of mercury (mmHg), torr (Torr), inch of mercury (inHg), kilogram-force per cm² (kgf/cm²))

## 結果

- 変換後の値 — 主な結果
- 単位換算
- 換算係数
- 正確さ

## 計算式

$$
\begin{gathered} x_{\text{to}} = x_{\text{from}} \times \dfrac{f_{\text{from}}}{f_{\text{to}}} \\ f = \text{one unit expressed in } \text{Pa} \end{gathered}
$$

## 計算例

### 32 psi tyre pressure in bar

- 値: 32 psi
- 変換元: pound per square inch (psi)
- 変換先: バール
- **変換後の値: 2.2063223338 bar**
- 照合元：1 psi = 4.4482216152605 N ÷ (0.0254 m)² (NIST SP 811 App. B); 32 psi = 8896443230521/4032250000000 bar (Python 3.8 fractions from the legal definitions)

### 1 atm in psi

- 値: 1 atm
- 変換元: standard atmosphere (atm)
- 変換先: pound per square inch (psi)
- **変換後の値: 14.6959487755 psi**
- 照合元：101325 Pa ÷ 6894.757293168… Pa (Python 3.8 fractions from the legal definitions)

### 760 torr is 1 atm

- 値: 760 Torr
- 変換元: torr (Torr)
- 変換先: standard atmosphere (atm)
- **変換後の値: 1 atm**
- **正確さ: 正確**
- 照合元：1 torr = 101325/760 Pa by definition (NIST SP 811 App. B)

### 1 inHg (conventional value)

- 値: 1 inHg
- 変換元: inch of mercury (inHg)
- 変換先: pascal (Pa)
- **変換後の値: 3,386.389 Pa**
- **正確さ: 近似**
- 照合元：NIST SP 811 App. B.9: inch of mercury (0 °C) = 3.386389 E+03 Pa

## よくある質問

### How do I convert psi to bar?

Divide by 14.5038, or multiply by 0.0689476. A bar is 100,000 Pa and a psi 6,894.757 Pa, so 1 bar = 14.5038 psi. A 32 psi tyre is 2.2063 bar, and a 2.5 bar tyre is 36.26 psi.

### Is 1 bar the same as 1 atmosphere?

No, though they are within 1.3%. The bar is exactly 100,000 Pa, while the standard atmosphere is exactly 101,325 Pa, which is 1.01325 bar, 14.696 psi or 760 mmHg. The atmosphere was set to match average sea-level air pressure, which is why weather charts centre on 1,013.25 hPa.

### What is the difference between psig and psia?

psig is gauge pressure, measured relative to the surrounding air; psia is absolute pressure, measured from a vacuum. At sea level psia = psig + 14.696. Tyre and compressor gauges read psig, so a flat tyre shows 0 psig while still holding 14.7 psia of air. The converter treats both alike, so keep input and output the same kind.

### Are mmHg and torr the same?

Almost. A torr is exactly 1/760 of a standard atmosphere, 133.322368 Pa, while the conventional millimetre of mercury is 133.322387415 Pa; they differ by about 0.14 parts per million. For blood pressure the difference never matters: 120/80 mmHg is 16.0/10.7 kPa either way.

### How do I convert inches of mercury to hPa?

Multiply by 33.8639: 29.92 inHg is 1,013.2 hPa, the standard altimeter setting in US aviation. This converter uses the conventional inch of mercury at 0 °C, 3,386.389 Pa (NIST SP 811), and marks results that use it as approximate because mercury's density changes with temperature.

### 「圧力単位換算」の精度はどのくらいですか？

精度は入力値と計算方法の前提に依存します。十進演算には有効数字50桁を使いますが、推定、数値計算手法、元データの精度はそれより低い場合があります。表示の丸め処理でこれらの制約がなくなるわけではありません。 独立した出典の解答と照合した計算例：4。 例えば、「32 psi tyre pressure in bar」は1 psi = 4.4482216152605 N ÷ (0.0254 m)² (NIST SP 811 App. B); 32 psi = 8896443230521/4032250000000 bar (Python 3.8 fractions from the legal definitions)と照合しています。

### この計算方法の出典は何ですか？

NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors; NIST Handbook 44, Appendix C — General tables of units of measurement.

## 出典

- [NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors](https://www.nist.gov/pml/special-publication-811)
- [NIST Handbook 44, Appendix C — General tables of units of measurement](https://www.nist.gov/pml/owm/nist-handbook-44-current-edition)