# 지붕 경사 계산기: 각도, 경사율과 높이

> 수직 높이와 수평 거리로 각도, 백분율 경사, 지붕 경사(12당 x), 빗면 길이와 서까래 길이 계수를 구하세요.

직접 계산할 수 있는 페이지: https://www.calcopenly.com/ko/geometry/slope-roof-pitch-calculator
분야: 기하 계산기

Every way of stating a slope comes from one ratio, m = rise ÷ run. The angle from horizontal is arctan m, the percent grade is 100m, the roof pitch is 12m (units of rise per 12 of run), and the rafter factor √(1 + m²) turns a horizontal run into the sloped length. Enter a rise and run, or any one of the other forms, and the rest follow.

The default rise of 6 over a run of 12 is a 6/12 roof: 26.57°, a 50% grade and a rafter factor of 1.1180, so 12 cm of run needs 13.4164 cm of rafter. Ramps and roads use the same numbers: the steepest ramp the 2010 ADA Standards allow, 1:12, is an 8.33% grade, or 4.76°.

Percent grade is not an angle: a 100% grade is 45°, and a vertical face has no finite grade or pitch, so angles must lie between −90° and 90°. A negative rise describes a downhill slope.

## 입력

- **알고 있는 값** (선택 항목: Rise and run, 각도, Percent grade, Roof pitch)
- **Rise**: Negative for a downhill slope
- **Run (horizontal distance)**
- **Angle from horizontal**: Between −90° and 90°
- **성적**: Rise per 100 of run
- **Pitch**: Rise for every 12 of run, as in a 6/12 roof
- **결과 단위** (선택 항목: 밀리미터 (mm), 센티미터 (cm), 미터 (m), 킬로미터 (km), 인치 (in), 피트 (ft), 야드 (yd), 마일 (mi))

## 결과

- 각도 (°) — 주요 결과
- 성적
- Roof pitch (in 12)
- Ratio (rise : run)
- Rise per unit of run
- Rafter length factor
- Slope length

## 공식

$$
\begin{gathered} m = \frac{\text{rise}}{\text{run}},\quad \theta = \arctan m,\quad \text{grade} = 100m\,\% \\[6pt] \text{pitch} = 12m \text{ in } 12,\quad \text{factor} = \sqrt{1 + m^2} \end{gathered}
$$

## 계산 예제

### Rise 6, run 12 (a 6/12 roof)

- 알고 있는 값: Rise and run
- Rise: 6 cm
- Run (horizontal distance): 12 cm
- 결과 단위: 센티미터 (cm)
- **각도: 26.565051 °**
- **성적: 50%**
- **Roof pitch: 6 in 12**
- **Ratio (rise : run): 1 : 2**
- **Rafter length factor: 1.118034**
- **Slope length: 13.416408 cm**
- 검증 출처: Python 3.8 math: degrees(atan(0.5)), sqrt(1.25), sqrt(6**2 + 12**2)

### 45°

- 알고 있는 값: 각도
- Angle from horizontal: 45 °
- **성적: 100%**
- **Roof pitch: 12 in 12**
- **Ratio (rise : run): 1 : 1**
- **Rafter length factor: 1.414214**
- 검증 출처: tan 45° = 1; Python 3.8 math.sqrt(2)

### 8 % road grade

- 알고 있는 값: Percent grade
- 성적: 8%
- **각도: 4.573921 °**
- **Roof pitch: 0.96 in 12**
- **Ratio (rise : run): 1 : 12.5**
- 검증 출처: Python 3.8 math: degrees(atan(0.08)); 12 × 0.08; 1/0.08

### 4/12 roof pitch

- 알고 있는 값: Roof pitch
- Pitch: 4 in 12
- **각도: 18.434949 °**
- **성적: 33.333333%**
- **Rafter length factor: 1.054093**
- 검증 출처: Python 3.8 math: degrees(atan(4/12)), sqrt(1 + 1/9)

### ADA ramp 1:12

- 알고 있는 값: Rise and run
- Rise: 1 cm
- Run (horizontal distance): 12 cm
- 결과 단위: 센티미터 (cm)
- **성적: 8.333333%**
- **각도: 4.763642 °**
- **Ratio (rise : run): 1 : 12**
- 검증 출처: ADA §405.2 maximum ramp slope 1:12; Python 3.8 math: degrees(atan(1/12))

### Flat ground (edge case)

- 알고 있는 값: Rise and run
- Rise: 0 cm
- Run (horizontal distance): 5 cm
- 결과 단위: 센티미터 (cm)
- **각도: 0 °**
- **성적: 0%**
- **Roof pitch: 0 in 12**
- **Rafter length factor: 1**
- **Slope length: 5 cm**
- 검증 출처: Zero rise: tan θ = 0

## 자주 묻는 질문

### How do you convert percent grade to degrees?

Take the arctangent of the grade divided by 100: θ = arctan(grade/100). An 8% road grade is arctan 0.08 = 4.57°, and a 100% grade is 45°, not 90°. The reverse is grade = 100 × tan θ, so a 30° slope is a 57.7% grade.

### What angle is a 6/12 roof pitch?

26.57°. A pitch of x/12 means x units of rise for every 12 of run, so the angle is arctan(x/12): 4/12 is 18.43°, 6/12 is 26.57°, 8/12 is 33.69° and 12/12 is 45°. The rafter factor for 6/12 is √1.25 = 1.118, so 12 ft of horizontal run needs 13.42 ft of rafter before any overhang.

### What is the maximum slope for a wheelchair ramp?

1:12 under the 2010 ADA Standards for Accessible Design (§405.2): one unit of rise for every 12 of run, an 8.33% grade or 4.76°. Each ramp run may rise at most 30 in (§405.6), so a 30 in rise needs a run of at least 30 ft. Other countries set their own limits in their building codes.

### How do you calculate rise over run?

Divide the vertical rise by the horizontal run, both in the same unit: m = rise/run. A roof that rises 6 in over 12 in of run has m = 0.5. Measure the run horizontally, not along the surface: the sloped length here is 13.42 in, and dividing by it gives 0.447, the sine of the angle rather than the slope.

### “지붕 경사 계산기: 각도, 경사율과 높이”의 정확도는 어느 정도인가요?

정확도는 입력값과 계산 방법의 가정에 따라 달라집니다. 십진 연산은 유효숫자 50자리를 사용하지만, 추정값·수치해석 방법·원본 데이터의 정밀도는 더 낮을 수 있습니다. 표시값을 반올림해도 이러한 한계는 사라지지 않습니다. 독립적인 출처의 풀이와 대조한 계산 예시: 8. 예를 들어 “Rise 6, run 12 (a 6/12 roof)”은 Python 3.8 math: degrees(atan(0.5)), sqrt(1.25), sqrt(6**2 + 12**2)와 대조해 확인합니다.

### 이 계산 방법의 출처는 무엇인가요?

OpenStax College Algebra 2e, §4.1 — slope as rise over run; US Access Board, ADA Standards §405.2 — ramp slope 1:12 (8.33 %).

## 출처

- [OpenStax College Algebra 2e, §4.1 — slope as rise over run](https://openstax.org/books/college-algebra-2e/pages/4-1-linear-functions)
- [US Access Board, ADA Standards §405.2 — ramp slope 1:12 (8.33 %)](https://www.access-board.gov/ada/#ada-405)