# RC time constant and RLC circuit calculator

> RC and RL time constant and the time to charge or discharge to any percent; series RLC resonant frequency, impedance, phase, Q factor and bandwidth.

Etkileşimli sürüm: https://www.calcopenly.com/tr/science/rc-rl-rlc-circuit-calculator
Konu: Bilim hesaplayıcıları

An RC circuit responds with time constant τ = RC and an RL circuit with τ = L/R: after one τ the capacitor voltage or inductor current has covered 63.2% of the way to its final value, and reaching a fraction p takes t = −τ ln(1 − p). For a series RLC circuit the calculator finds the resonant frequency f₀ = 1/(2π√(LC)), the impedance and phase at your signal frequency from the reactances 2πfL and 1/(2πfC), and Q = (1/R)√(L/C).

The default, 10 kΩ with 100 µF on a 5 V supply, gives τ = 1 s and 2.30 s to reach 90%. RC time constants set timer delays, switch debounce periods and filter cut-off frequencies, 1/(2πRC). With 10 Ω, 10 mH and 1 µF in series, f₀ = 1,591.55 Hz and Q = 10.

Components are ideal and the input is a step: no capacitor leakage and no inductor winding resistance beyond R. After 5τ the response is within 0.67% of its final value (e⁻⁵), the usual rule for "fully charged".

## Girdiler

- **Circuit** (seçenekler: RC, RL, Series RLC)
- **Resistance R**: Accepts 4.7k
- **Resistance unit** (seçenekler: mΩ, Ω, kΩ, MΩ)
- **Capacitance C**
- **Capacitance unit** (seçenekler: pF, nF, µF, mF, F)
- **Inductance L**
- **Inductance unit** (seçenekler: nH, µH, mH, H)
- **Process** (seçenekler: Charging / rising, Discharging / decaying)
- **Source voltage**
- **Time to reach this level**: Percent of the final value (charging) or of the starting value (discharging)
- **Show times in**: Auto picks s, ms, µs or ns from the size of τ (seçenekler: Auto, s, ms, µs, ns)
- **Value at time**
- **Signal frequency**

## Sonuçlar

- Time constant τ (s) — ana sonuç
- Time to reach the level (s)
- Value at the chosen time
- Final value
- Energy stored when fully charged (J)
- Resonant frequency f₀ (Hz)
- Impedance |Z| at the signal frequency (Ω)
- Phase angle (voltage leads current) (°)
- Inductive reactance X_L (Ω)
- Capacitive reactance X_C (Ω)
- Quality factor Q
- Bandwidth (−3 dB) (Hz)
- Current amplitude at the signal frequency (A)
- Damping

## Formül

$$
\tau_{RC} = RC,\ \tau_{RL} = \frac{L}{R},\quad v(t) = V(1 - e^{-t/\tau});\qquad f_0 = \frac{1}{2\pi\sqrt{LC}},\ |Z| = \sqrt{R^2 + (X_L - X_C)^2},\ Q = \frac1R\sqrt{\frac{L}{C}}
$$

## Çözümlü örnekler

### 10 kΩ and 100 µF charging to 90%

- Circuit: RC
- Resistance R: 10
- Resistance unit: kΩ
- Capacitance C: 100
- Capacitance unit: µF
- Process: Charging / rising
- Source voltage: 5 V
- Time to reach this level: 90%
- **Time constant τ: 1 s**
- **Time to reach the level: 2.30259 s**
- **Energy stored when fully charged: 0.00125 J**
- Doğrulama kaynağı: Python 3.8 math: τ = 10⁴ × 10⁻⁴ = 1 s; t = τ ln 10; E = ½CV² = ½·10⁻⁴·25

### Capacitor voltage after one τ

- Circuit: RC
- Resistance R: 10
- Resistance unit: kΩ
- Capacitance C: 100
- Capacitance unit: µF
- Process: Charging / rising
- Source voltage: 5 V
- Time to reach this level: 90%
- Value at time: 1 s
- **Value at the chosen time: 3.1606 V**
- Doğrulama kaynağı: Python 3.8 math: 5(1 − e⁻¹) = 3.1606028

### Discharging to half: t = τ ln 2

- Circuit: RC
- Resistance R: 10
- Resistance unit: kΩ
- Capacitance C: 100
- Capacitance unit: µF
- Process: Discharging / decaying
- Source voltage: 5 V
- Time to reach this level: 50%
- **Time to reach the level: 0.693147 s**
- Doğrulama kaynağı: Python 3.8 math: ln 2 = 0.6931472 (τ = 1 s)

### RL: 100 Ω and 10 mH

- Circuit: RL
- Resistance R: 100
- Resistance unit: Ω
- Inductance L: 10
- Inductance unit: mH
- Process: Charging / rising
- Source voltage: 5 V
- Time to reach this level: 90%
- Show times in: s
- Value at time: 50 µs
- **Time constant τ: 0.0001 s**
- **Final value: 0.05 A**
- **Value at the chosen time: 0.019673 A**
- Doğrulama kaynağı: Python 3.8 math: τ = L/R = 10⁻⁴ s, I = 5/100, i(50 µs) = 0.05(1 − e^−0.5) = 0.0196735

### Series RLC 10 Ω, 10 mH, 1 µF at 1 kHz

- Circuit: Series RLC
- Resistance R: 10
- Resistance unit: Ω
- Capacitance C: 1
- Capacitance unit: µF
- Inductance L: 10
- Inductance unit: mH
- Source voltage: 5 V
- Signal frequency: 1 kHz
- **Resonant frequency f₀: 1,591.55 Hz**
- **Quality factor Q: 10**
- **Impedance |Z| at the signal frequency: 96.8408 Ω**
- **Phase angle (voltage leads current): -84.07 °**
- **Bandwidth (−3 dB): 159.155 Hz**
- Doğrulama kaynağı: Python 3.8 math: f₀ = 1/(2π√(10⁻⁸)), X_L = 62.83185, X_C = 159.15494, |Z| = 96.8407852, φ = atan(−96.3231/10)

### Critically damped RLC (R = 2√(L/C))

- Circuit: Series RLC
- Resistance R: 200
- Resistance unit: Ω
- Capacitance C: 1
- Capacitance unit: µF
- Inductance L: 10
- Inductance unit: mH
- Source voltage: 5 V
- Signal frequency: 1 kHz
- **Quality factor Q: 0.5**
- **Damping: Critically damped**
- Doğrulama kaynağı: Q = ½ exactly when R = 2√(L/C) = 200 Ω (OpenStax UP2 §14.6)

## Sorular

### What is the RC time constant?

τ = R × C, in seconds when R is in ohms and C in farads. It is the time a charging capacitor takes to reach 63.2% (1 − e⁻¹) of the supply voltage, or a discharging one to fall to 36.8%. 10 kΩ with 100 µF gives τ = 1 s; 1 kΩ with 1 µF gives 1 ms.

### How long does it take a capacitor to fully charge?

About five time constants. After 5τ the voltage is 99.33% of the supply (1 − e⁻⁵), which engineers treat as fully charged; in theory it never quite gets there. Reaching 90% takes τ ln 10 ≈ 2.303τ and 99% takes τ ln 100 ≈ 4.605τ, so a 10 kΩ, 100 µF circuit reaches 99% in 4.6 s.

### How do you calculate the resonant frequency of an RLC circuit?

f₀ = 1/(2π√(LC)), with L in henries and C in farads; in a series circuit R does not shift it. 10 mH with 1 µF resonates at 1,591.55 Hz, and 100 µH with 100 pF at 1.59 MHz. At f₀ the inductive and capacitive reactances are equal and cancel, so the impedance falls to R alone and the current peaks.

### What is the Q factor of a series RLC circuit?

Q = (1/R)√(L/C), the ratio of either reactance at resonance to the resistance. It sets the −3 dB bandwidth, Δf = f₀/Q: 10 Ω, 10 mH and 1 µF give Q = 10 and a 159 Hz band around 1,592 Hz. Above Q = 0.5 the circuit rings (underdamped); exactly 0.5 is critically damped, reached here at R = 2√(L/C) = 200 Ω.

### What is the time constant of an RL circuit?

τ = L/R. It is the time for the current to rise to 63.2% of its final value V/R after the switch closes, or to fall to 36.8% once the source is removed and the coil discharges through R. 10 mH with 100 Ω gives τ = 100 µs, so on 5 V the current reaches 99% of 50 mA in about 460 µs.

### “RC time constant and RLC circuit calculator” ne kadar doğru sonuç verir?

Doğruluk, girdilerinize ve yöntemin varsayımlarına bağlıdır. Ondalık aritmetik 50 anlamlı basamak kullanır; ancak tahminler, sayısal yöntemler ve kaynak veriler daha az hassas olabilir. Gösterilen değerin yuvarlanması bu sınırları ortadan kaldırmaz. Bağımsız kaynaklarla doğrulanan çözümlü örnek sayısı: 7. Örneğin “10 kΩ and 100 µF charging to 90%”, Python 3.8 math: τ = 10⁴ × 10⁻⁴ = 1 s; t = τ ln 10; E = ½CV² = ½·10⁻⁴·25 ile karşılaştırılarak doğrulanır.

### Yöntemin kaynağı nedir?

OpenStax University Physics Volume 2, §10.5 RC circuits; §14.4 RL circuits; §15.3 RLC series circuits with AC; HyperPhysics — Series RLC resonance and Q.

## Kaynaklar

- [OpenStax University Physics Volume 2, §10.5 RC circuits; §14.4 RL circuits; §15.3 RLC series circuits with AC](https://openstax.org/books/university-physics-volume-2/pages/15-3-rlc-series-circuits-with-ac)
- [HyperPhysics — Series RLC resonance and Q](http://hyperphysics.phy-astr.gsu.edu/hbase/electric/serres.html)