# Ohm's law calculator

> Ohm's law calculator: enter any two of voltage, current, resistance and power to get the other two, shown in the units you pick (mA, kΩ…).

انٹرایکٹو صورت: https://www.calcopenly.com/ur/science/ohms-law-calculator
موضوع: سائنس کے کیلکولیٹر

Ohm's law says the current through a resistor equals the voltage across it divided by its resistance, I = V/R. Combined with the power law P = VI, any two of voltage, current, resistance and power fix the other two: P = I²R and P = V²/R follow by substitution. Solved values are shown in the unit you choose, so a milliamp current does not appear as 0.002 A.

The default, 12 V across 6 Ω, gives 2 A and 24 W. The same arithmetic sizes fuses and cables (a 2,300 W kettle on 230 V draws 10 A) and checks resistor ratings (a 100 Ω, ¼ W resistor carries at most 50 mA).

The law holds for ohmic conductors, whose resistance stays constant as the current changes. Diodes, LEDs and filament lamps are not ohmic, so a single resistance value describes them only at one operating point.

## اندراجات

- **I know** (اختیارات: Voltage and resistance, Voltage and current, Current and resistance, Voltage and power, Current and power, Resistance and power)
- **Voltage**
- **Voltage unit** (اختیارات: mV, V, kV)
- **برقی رو**
- **Current unit** (اختیارات: µA, mA, A, kA)
- **Resistance**: Accepts 4.7k or 2.2M
- **Resistance unit** (اختیارات: mΩ, Ω, kΩ, MΩ)
- **طاقت**
- **Show voltage in** (اختیارات: mV, V, kV)
- **Show current in** (اختیارات: µA, mA, A, kA)
- **Show resistance in** (اختیارات: mΩ, Ω, kΩ, MΩ)
- **Show power in** (اختیارات: mW, W, kW)

## نتائج

- برقی رو (A) — بنیادی نتیجہ
- Voltage (V)
- Resistance (Ω)
- طاقت (W)
- Conductance (S)

## فارمولا

$$
V = IR,\qquad P = VI = I^2R = \frac{V^2}{R}
$$

## حل شدہ مثالیں

### 12 V across 6 Ω

- I know: Voltage and resistance
- Voltage: 12
- Voltage unit: V
- Resistance: 6
- Resistance unit: Ω
- Show current in: A
- Show power in: W
- **برقی رو: 2 A**
- **طاقت: 24 W**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: I = 12/6, P = 12²/6⁩

### Kettle: 230 V drawing 10 A

- I know: Voltage and current
- Voltage: 230
- Voltage unit: V
- برقی رو: 10
- Current unit: A
- Show resistance in: Ω
- Show power in: W
- **Resistance: 23 Ω**
- **طاقت: 2,300 W**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: R = 230/10, P = 230 × 10⁩

### Quarter-watt 100 Ω resistor at full rating

- I know: Resistance and power
- Resistance: 100
- Resistance unit: Ω
- طاقت: 0.25 W
- Show voltage in: V
- Show current in: A
- **برقی رو: 0.05 A**
- **Voltage: 5 V**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: I = √(0.25/100), V = √(0.25 × 100)⁩

### 5 V, 500 mW

- I know: Voltage and power
- Voltage: 5
- Voltage unit: V
- طاقت: 500 mW
- Show current in: A
- Show resistance in: Ω
- **برقی رو: 0.1 A**
- **Resistance: 50 Ω**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: I = 0.5/5, R = 25/0.5⁩

### 20 mA dissipating 40 mW

- I know: Current and power
- برقی رو: 20
- Current unit: mA
- طاقت: 40 mW
- Show voltage in: V
- Show resistance in: Ω
- **Voltage: 2 V**
- **Resistance: 100 Ω**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: V = 0.04/0.02, R = 0.04/0.02²⁩

### 2 mA through 4.7k (typed with the k suffix)

- I know: Current and resistance
- برقی رو: 2
- Current unit: mA
- Resistance: 4.7k
- Resistance unit: Ω
- Show voltage in: V
- Show power in: W
- **Voltage: 9.4 V**
- **طاقت: 0.0188 W**
- جانچ کا ماخذ: ⁨Python 3.8 decimal: V = 0.002 × 4700, P = 0.002² × 4700⁩

## سوالات

### How do you calculate current from voltage and resistance?

Divide the voltage by the resistance: I = V/R. With 12 V across 6 Ω the current is 2 A; with 5 V across 1 kΩ it is 0.005 A, or 5 mA. Convert kilohms to ohms (×1,000) before dividing, or pick kΩ and mA in the unit selectors and let the calculator convert.

### How do you convert watts to amps?

Divide the power by the voltage: I = P/V. A 2,300 W kettle on a 230 V supply draws 10 A, and a 60 W load on 12 V draws 5 A. For AC this holds for resistive loads such as heaters and kettles; motors and power supplies with a power factor below 1 draw more current than P/V.

### What is the formula for electrical power?

P = VI, which becomes P = I²R or P = V²/R once Ohm's law is substituted. A 100 Ω resistor with 5 V across it dissipates 5²/100 = 0.25 W, exactly the limit of a ¼ W part, so a 0.5 W resistor is the safer choice there.

### Does Ohm's law apply to LEDs and light bulbs?

Not with a single fixed resistance. An LED conducts almost nothing below its forward voltage (about 2 V for red, about 3 V for blue and white) and then current rises steeply, so it needs a series resistor. A filament lamp's resistance rises as the tungsten heats, so the V²/P value, 882 Ω for a 60 W, 230 V bulb, applies only when it is lit.

### What is conductance?

Conductance is the reciprocal of resistance, G = 1/R, measured in siemens (S). A 6 Ω resistor has a conductance of 1/6 ≈ 0.167 S. Conductances in parallel add directly, which is why it is convenient for parallel networks: 1/R_total = G₁ + G₂ + …

### “⁨Ohm's law calculator⁩” کتنا درست ہے؟

درستی آپ کی درج کردہ قدروں اور طریقے کے مفروضوں پر منحصر ہے۔ اعشاری حساب 50 بامعنی ہندسے استعمال کرتا ہے، مگر تخمینے، عددی طریقے اور ماخذ کا ڈیٹا کم درست ہو سکتے ہیں؛ دکھائی گئی قدروں کو راؤنڈ کرنے سے یہ حدود ختم نہیں ہوتیں۔ آزاد ذرائع کی حل شدہ مثالوں سے جانچ: 6۔ مثلاً، “⁨12 V across 6 Ω⁩” کو ⁨Python 3.8 decimal: I = 12/6, P = 12²/6⁩ سے جانچا جاتا ہے۔

### اس طریقے کا ماخذ کیا ہے؟

OpenStax University Physics Volume 2, §9.4 Ohm's law and §9.5 Electrical energy and power; HyperPhysics — Ohm's law, power.

## ماخذ

- [OpenStax University Physics Volume 2, §9.4 Ohm's law and §9.5 Electrical energy and power](https://openstax.org/books/university-physics-volume-2/pages/9-4-ohms-law)
- [HyperPhysics — Ohm's law, power](http://hyperphysics.phy-astr.gsu.edu/hbase/electric/ohmlaw.html)