# Binary, hex and decimal converter

> Convert numbers between binary, decimal, hex, octal and any base 2–36, including fractions, repeating digits and two's-complement bits for negatives.

交互版本：https://www.calcopenly.com/zh/programming/binary-hex-converter
主题：编程与技术计算器

A number written in base b is a sum of digits times powers of b, so 2A in hex is 2 × 16 + 10 = 42. To write a whole number in base b, the converter divides by b repeatedly and reads the remainders from last to first; for a fraction it multiplies by b repeatedly and takes each whole part as the next digit. It works with exact fractions, so it can tell whether the digits after the point end or repeat.

Programmers use it for memory addresses, color codes, file permissions and bit masks. The default, −42, is −2A in hex and 1111 1111 1101 0110 in 16-bit two's complement, which reads as 65,494 when the same bits are treated as unsigned. Decimal 0.1 never ends in binary: it is 0.0(0011), with the block 0011 repeating.

Two's-complement bits are shown for whole numbers at widths from 8 to 128 bits; a value outside the chosen width wraps to its low bits, with a warning.

## 输入

- **Number**: Use a point for fractions. In auto mode 0x, 0b and 0o prefixes pick the base. Spaces and underscores are ignored.
- **From base** (选项：Auto (prefix, else decimal), Binary (2), Octal (8), Decimal (10), Hex (16), Other base)
- **Source base**
- **To base** (选项：Binary (2), Octal (8), Decimal (10), Hex (16), Other base)
- **Target base**
- **Two's-complement width** (选项：8-bit, 16-bit, 32-bit, 64-bit, 128-bit)
- **数字分组**: Applies to every base except decimal; binary in 4s shows nibbles, in 8s shows bytes. (选项：None, Groups of 4, Groups of 8)
- **Fraction digits to show**

## 结果

- 结果 — 主要结果
- Binary
- Octal
- Decimal
- Hex
- Fraction in the target base
- Exact form
- Repeating block length
- Two's-complement bits
- Two's complement in hex
- Bits read as unsigned
- Bits read as signed

## 公式

$$
\begin{aligned} (d_{k-1}\cdots d_1 d_0.d_{-1}d_{-2}\cdots)_b &= \sum_i d_i\, b^{i} \\ -x \text{ in } w \text{ bits} &= 2^w - x\end{aligned}
$$

## 计算示例

### 255 to hex

- Number: 255
- From base: Decimal (10)
- To base: Hex (16)
- Two's-complement width: 16-bit
- 数字分组: Groups of 4
- **结果: FF**
- **Binary: 1111 1111**
- **Octal: 377**
- **Fraction in the target base: Whole number**
- 核验来源：Python 3.8: format(255, 'X'), format(255, 'b'), format(255, 'o')

### −42 in 16-bit two's complement

- Number: -42
- From base: Decimal (10)
- To base: Hex (16)
- Two's-complement width: 16-bit
- 数字分组: Groups of 4
- **结果: -2A**
- **Two's-complement bits: 1111 1111 1101 0110**
- **Two's complement in hex: FFD6**
- **Bits read as unsigned: 65494**
- **Bits read as signed: -42**
- 核验来源：Python 3.8: format(-42 & 0xFFFF, '016b') = '1111111111010110', format(-42 & 0xFFFF, 'X') = 'FFD6', 2**16 − 42 = 65494

### 0.1 decimal is repeating in binary

- Number: 0.1
- From base: Decimal (10)
- To base: Binary (2)
- Two's-complement width: 16-bit
- 数字分组: None
- Fraction digits to show: 12
- **结果: 0.000110011001…**
- **Exact form: 0.0(0011)**
- **Fraction in the target base: Repeating**
- **Repeating block length: 4**
- 核验来源：Python 3.8: format(int(Fraction(1, 10) * 2**12), '012b') = '000110011001'; a separate long-division script finds the remainder cycle of length 4 starting after the first digit

### Hex fraction 0x1.8

- Number: 0x1.8
- From base: Auto (prefix, else decimal)
- To base: Decimal (10)
- Two's-complement width: 16-bit
- 数字分组: Groups of 4
- **结果: 1.5**
- **Fraction in the target base: Terminating**
- **Binary: 1.1**
- 核验来源：Python 3.8: float.fromhex('0x1.8') = 1.5

### 128 overflows signed 8-bit

- Number: 128
- From base: Decimal (10)
- To base: Binary (2)
- Two's-complement width: 8-bit
- 数字分组: None
- **结果: 10000000**
- **Two's-complement bits: 10000000**
- **Bits read as unsigned: 128**
- **Bits read as signed: -128**
- 核验来源：Python 3.8: int.from_bytes(bytes([128]), 'big', signed=True) = -128

### Base 36 ZZ

- Number: ZZ
- From base: Other base
- Source base: 36
- To base: Decimal (10)
- Two's-complement width: 16-bit
- 数字分组: Groups of 4
- **结果: 1295**
- **Hex: 50F**
- 核验来源：Python 3.8: int('ZZ', 36) = 1295, format(1295, 'X') = '50F'

## 常见问题

### How do you convert binary to decimal?

Multiply each binary digit by 2 raised to its position, counting from 0 at the right, and add the results. 1111 1111 is 128 + 64 + 32 + 16 + 8 + 4 + 2 + 1 = 255, and 101010 is 32 + 8 + 2 = 42. Digits after a binary point use negative powers, so 1.1 is 1 + 1/2 = 1.5.

### How do you convert decimal to hexadecimal?

Divide by 16 repeatedly and write the remainders from last to first, using A–F for 10–15. For 255, 255 ÷ 16 = 15 remainder 15, then 15 ÷ 16 = 0 remainder 15, giving FF; for 1295 the remainders 15, 0 and 5 give 50F. Each hex digit stands for exactly 4 bits, which is why hex is used to write bytes: FF is 1111 1111.

### What is two's complement?

Two's complement is how CPUs store signed integers: a negative number −x in w bits is stored as 2^w − x, so the top bit carries a weight of −2^(w−1). In 16 bits, −42 is 65,536 − 42 = 65,494, or FFD6 in hex. An 8-bit value runs from −128 to 127, so 128 wraps to −128. C23 (ISO/IEC 9899:2024) requires two's complement for signed integers.

### Why is 0.1 not exact in binary?

A fraction ends in base b only if its denominator, in lowest terms, has no prime factors other than those of b. 0.1 is 1/10, and 10 = 2 × 5, so in binary it repeats forever: 0.000110011…, written 0.0(0011). That is why 0.1 + 0.2 gives 0.30000000000000004 in IEEE 754 double precision, the number type behind JavaScript numbers and Python floats.

### What is octal used for?

Octal (base 8) groups binary digits in threes, and its main use today is Unix file permissions: each digit adds read (4), write (2) and execute (1) for the owner, group and others, so chmod 755 means rwxr-xr-x. Decimal 255 is 377 in octal. Python 3 and JavaScript write octal literals as 0o755; C writes them with a leading zero, 0755.

### “Binary, hex and decimal converter”有多准确？

准确性取决于输入值和方法的假设。十进制运算使用50位有效数字，但估算、数值方法和源数据的精度可能较低；显示时的舍入并不能消除这些限制。 已按独立来源核验的计算示例：7。 例如，“255 to hex”根据Python 3.8: format(255, 'X'), format(255, 'b'), format(255, 'o')进行核验。

### 这种方法出自哪里？

Knuth, The Art of Computer Programming, Vol. 2, §4.1 Positional number systems and §4.4 Radix conversion; ISO/IEC 9899:2024 (C23) §6.2.6.2 — signed integers use two's complement (draft N3096).

## 来源

- Knuth, The Art of Computer Programming, Vol. 2, §4.1 Positional number systems and §4.4 Radix conversion
- [ISO/IEC 9899:2024 (C23) §6.2.6.2 — signed integers use two's complement (draft N3096)](https://www.open-std.org/jtc1/sc22/wg14/www/docs/n3096.pdf)