Cycling power-to-weight (W/kg), speed and pace, or swimming pace per 100 m and 100 yd with your SWOLF score.
업데이트 검증한 예제: 6
250 W at 75 kg is 3.33 W/kg. 30 km/h is 2:00 per km, so 40 km takes 1:20:00.
For cycling, power-to-weight is power in watts divided by body weight in kilograms (W/kg), and speed converts to pace as 3,600 ÷ km/h seconds per kilometre, with the time for a chosen ride distance. For swimming, pace is time ÷ distance × 100, per 100 m and per 100 yd, and SWOLF adds the average strokes per length to the average seconds per length.
Cyclists compare W/kg because it sets climbing speed, and swimmers track SWOLF as a measure of efficiency. A 75 kg rider holding 250 W has 3.33 W/kg, and at 30 km/h a 40 km ride takes 1:20:00. A swimmer covering 400 m in 8:00 in a 25 m pool swims 2:00 per 100 m and, at 18 strokes per length, scores a SWOLF of 48.
W/kg ignores aerodynamic drag, which dominates on flat roads. SWOLF scores are comparable only within the same pool length and stroke-counting method.
검증 출처: Python 3.8 decimal: 250/75; 250/(75/0.45359237); 3600/30 s/km; 40/30 h
검증 출처: 3600 s/h ÷ 150 s/km = 24 km/h
검증 출처: Python 3.8 decimal: 480 s/4 = 120 s per 100 m; × 0.9144 per 100 yd; 18 + 480/16
검증 출처: Python 3.8 decimal: 450 s/5 = 90 s per 100 yd; 450/457.2 m × 100 = 98.4252 s per 100 m; 15 + 450/20
Divide power in watts by body weight in kilograms. A 75 kg rider producing 250 W has 250 ÷ 75 = 3.33 W/kg, or 1.51 W/lb at 165 lb. Riders usually quote W/kg at functional threshold power (FTP), which Allen and Coggan describe as the highest power sustainable for about an hour and estimate as 95 % of the average from a 20-minute test.
SWOLF, from swim and golf, is the number of strokes plus the number of seconds for one pool length, and as in golf a lower score is better. Garmin's example is 15 strokes in 30 seconds, a score of 45. Because it depends on pool length and on how strokes are counted (Garmin counts one per full cycle of the watch arm), scores are comparable only for the same pool and device.
Divide 3,600 by the speed in km/h to get seconds per kilometre: 30 km/h is 120 s, or 2:00 per km, and 24 km/h is 2:30 per km. For pace per mile, divide 5,793.6 by the speed in km/h, because a mile is exactly 1.609344 km: 30 km/h is 3:13 per mile.
Multiply by 0.9144, because 100 yd is exactly 91.44 m. A pace of 2:00 per 100 m (120 s) becomes 109.7 s, about 1:50 per 100 yd. Going the other way, divide by 0.9144, so 1:30 per 100 yd is about 1:38 per 100 m. The yard is defined as 0.9144 m exactly (NIST SP 811).
정확도는 입력값과 계산 방법의 가정에 따라 달라집니다. 십진 연산은 유효숫자 50자리를 사용하지만, 추정값·수치해석 방법·원본 데이터의 정밀도는 더 낮을 수 있습니다. 표시값을 반올림해도 이러한 한계는 사라지지 않습니다. 독립적인 출처의 풀이와 대조한 계산 예시: 6. 예를 들어 “250 W at 75 kg, 30 km/h for 40 km”은 Python 3.8 decimal: 250/75; 250/(75/0.45359237); 3600/30 s/km; 40/30 h와 대조해 확인합니다.
Allen H, Coggan A. Training and Racing with a Power Meter, 3rd ed. VeloPress; 2019 — power-to-weight (W/kg); Garmin Swim 2 owner's manual — swim terminology (SWOLF); NIST SP 811 — 1 yd = 0.9144 m, 1 mi = 1609.344 m exactly.
이 계산기에는 독립적인 출처에서 답을 얻은 계산 예제가 6개 있습니다. 테스트 모음에서 실행되며 여기에서도 실행할 수 있습니다.
Running pace per km or mile from distance and time, or finish time or distance from pace, with even splits and Riegel race predictions.
Calories burned by an activity from its MET value in the Compendium of Physical Activities, your body weight and the time spent.
Heart rate zones from your maximum heart rate (220 − age, Tanaka, Gulati for women, or measured) by the Karvonen or percent-of-max method, with a target heart rate.
VO2 max from the Cooper 12-minute run, the Rockport 1-mile walk or the resting heart-rate ratio, rated against Cooper Institute norms for age and sex.
One-rep max (1RM) from a set of reps with the Epley, Brzycki, Lombardi and O'Conner equations, plus training loads from 50 % to 100 %.
Steps to distance in km and miles from a step length based on your height or measured, with walking time and calories from the ACSM equation.