Ohm's law calculator

Ohm's law calculator: enter any two of voltage, current, resistance and power to get the other two, shown in the units you pick (mA, kΩ…).

Atualizado Exemplos verificados: 6

Accepts 4.7k or 2.2M
Experimentar
Corrente elétrica
A
Corrente elétrica: 2 A
Algarismos significativos: 6; Ao mais próximo; empates afastando-se de zero
Voltage
12V
Resistance
6Ω
Potência
24W
Conductance
0.166667S

12 V across 6 Ω drives 2 A and turns 24 W into heat.

Ohm's-law triangle (solved values highlighted)

V12 VI2 AR6 ΩP = V × I24 WCover the one you want: V = I × R, I = V ÷ R, R = V ÷ I
Como é calculado S
  1. Given, in base units

    V=12 V,R=6 ΩV = 12\ \mathrm{V},\quad R = 6\ \mathrm{\Omega}
  2. Find I

    I=VR=126=2 AI = \frac{V}{R} = \frac{12}{6} = 2\ \mathrm{A}
  3. Find P

    P=V2R=(12)26=24 WP = \frac{V^2}{R} = \frac{(12)^2}{6} = 24\ \mathrm{W}
  4. Check

    IR=12 V,VI=24 WIR = 12\ \mathrm{V},\quad VI = 24\ \mathrm{W}

    Ohm's law holds for ohmic conductors (resistance independent of current); diodes, lamps and LEDs are not ohmic.

Sobre Ohm's law calculator

Ohm's law says the current through a resistor equals the voltage across it divided by its resistance, I = V/R. Combined with the power law P = VI, any two of voltage, current, resistance and power fix the other two: P = I²R and P = V²/R follow by substitution. Solved values are shown in the unit you choose, so a milliamp current does not appear as 0.002 A.

The default, 12 V across 6 Ω, gives 2 A and 24 W. The same arithmetic sizes fuses and cables (a 2,300 W kettle on 230 V draws 10 A) and checks resistor ratings (a 100 Ω, ¼ W resistor carries at most 50 mA).

The law holds for ohmic conductors, whose resistance stays constant as the current changes. Diodes, LEDs and filament lamps are not ohmic, so a single resistance value describes them only at one operating point.

Exemplos resolvidos

12 V across 6 Ω

I know
Voltage and resistance
Voltage
12
Voltage unit
V
Resistance
6
Resistance unit
Ω
Show current in
A
Show power in
W
Corrente elétrica
2 A
Potência
24 W

Fonte de verificação: Python 3.8 decimal: I = 12/6, P = 12²/6

Kettle: 230 V drawing 10 A

I know
Voltage and current
Voltage
230
Voltage unit
V
Corrente elétrica
10
Current unit
A
Show resistance in
Ω
Show power in
W
Resistance
23 Ω
Potência
2,300 W

Fonte de verificação: Python 3.8 decimal: R = 230/10, P = 230 × 10

Quarter-watt 100 Ω resistor at full rating

I know
Resistance and power
Resistance
100
Resistance unit
Ω
Potência
0.25 W
Show voltage in
V
Show current in
A
Corrente elétrica
0.05 A
Voltage
5 V

Fonte de verificação: Python 3.8 decimal: I = √(0.25/100), V = √(0.25 × 100)

5 V, 500 mW

I know
Voltage and power
Voltage
5
Voltage unit
V
Potência
500 mW
Show current in
A
Show resistance in
Ω
Corrente elétrica
0.1 A
Resistance
50 Ω

Fonte de verificação: Python 3.8 decimal: I = 0.5/5, R = 25/0.5

Perguntas

How do you calculate current from voltage and resistance?

Divide the voltage by the resistance: I = V/R. With 12 V across 6 Ω the current is 2 A; with 5 V across 1 kΩ it is 0.005 A, or 5 mA. Convert kilohms to ohms (×1,000) before dividing, or pick kΩ and mA in the unit selectors and let the calculator convert.

How do you convert watts to amps?

Divide the power by the voltage: I = P/V. A 2,300 W kettle on a 230 V supply draws 10 A, and a 60 W load on 12 V draws 5 A. For AC this holds for resistive loads such as heaters and kettles; motors and power supplies with a power factor below 1 draw more current than P/V.

What is the formula for electrical power?

P = VI, which becomes P = I²R or P = V²/R once Ohm's law is substituted. A 100 Ω resistor with 5 V across it dissipates 5²/100 = 0.25 W, exactly the limit of a ¼ W part, so a 0.5 W resistor is the safer choice there.

Does Ohm's law apply to LEDs and light bulbs?

Not with a single fixed resistance. An LED conducts almost nothing below its forward voltage (about 2 V for red, about 3 V for blue and white) and then current rises steeply, so it needs a series resistor. A filament lamp's resistance rises as the tungsten heats, so the V²/P value, 882 Ω for a 60 W, 230 V bulb, applies only when it is lit.

What is conductance?

Conductance is the reciprocal of resistance, G = 1/R, measured in siemens (S). A 6 Ω resistor has a conductance of 1/6 ≈ 0.167 S. Conductances in parallel add directly, which is why it is convenient for parallel networks: 1/R_total = G₁ + G₂ + …

Qual é a precisão de “Ohm's law calculator”?

A precisão depende dos dados inseridos e das hipóteses do método. O cálculo decimal usa 50 algarismos significativos, mas estimativas, métodos numéricos e dados de origem podem ter menor precisão; o arredondamento exibido não elimina essas limitações. Exemplos resolvidos verificados com fontes independentes: 6. Por exemplo, “12 V across 6 Ω” é verificado com Python 3.8 decimal: I = 12/6, P = 12²/6.

De onde vem o método?

OpenStax University Physics Volume 2, §9.4 Ohm's law and §9.5 Electrical energy and power; HyperPhysics — Ohm's law, power.

Sobre esta calculadora

V=IR,P=VI=I2R=V2RV = IR,\qquad P = VI = I^2R = \frac{V^2}{R}

Fontes

  1. OpenStax University Physics Volume 2, §9.4 Ohm's law and §9.5 Electrical energy and power
  2. HyperPhysics — Ohm's law, power

Verificado com as referências

Esta calculadora inclui 6 exemplos resolvidos com respostas de fontes independentes. Eles fazem parte do conjunto de testes e você também pode executá-los aqui.

Calculadoras relacionadas