Series and parallel resistor calculator

Series and parallel resistor calculator: total resistance of any number of resistors, plus capacitors or inductors in series or parallel.

Обновлено 28 сентября 2026 г.Проверенные примеры: 7

Equivalent value

Значащих цифр: 6; До ближайшего, при равенстве — от нуля

Number of components: 3

3 resistors in parallel act like one of 59.9768 Ω — always smaller than the smallest single part.

3 resistors in parallel: 59.9768 Ω

Как выполняется расчёт S

Resistors in parallel
$\frac{1}{R_{\text{eq}}} = \frac{1}{100} + \frac{1}{220} + \frac{1}{470} \;\Rightarrow\; R_{\text{eq}} = 59.9768\ \mathrm{\Omega}$
Reciprocals add.

О калькуляторе: Series and parallel resistor calculator

Resistors add in series, R = R₁ + R₂ + …, while in parallel their reciprocals add, 1/R = 1/R₁ + 1/R₂ + … . Inductors follow the same two rules when their magnetic fields do not interact. Capacitors do the opposite: they add in parallel and combine by reciprocals in series. Enter any number of values in one unit; 4.7k is read as 4,700.

The default, 100 Ω, 220 Ω and 470 Ω in parallel, gives 59.98 Ω, below the smallest part as every parallel network must be; the same three in series give 790 Ω. Combining parts is how a value outside the E-series is built, such as 500 Ω from two 1 kΩ resistors in parallel.

The parts are treated as ideal: no lead or contact resistance, no capacitor leakage and no mutual inductance between coils.

Примеры с решением

100, 220, 470 Ω in series

Components: Resistors
Connected in: Series
Values: 100, 220, 470
Единица: Ω

Equivalent value: 790 Ω

Источник проверки: Python 3.8 decimal: 100 + 220 + 470

100, 220, 470 Ω in parallel

Components: Resistors
Connected in: Parallel
Values: 100, 220, 470
Единица: Ω

Equivalent value: 59.9768 Ω

Источник проверки: Python 3.8 fractions: 1/(1/100 + 1/220 + 1/470) = 25850/431 = 59.976798…

Two equal 1 kΩ in parallel

Components: Resistors
Connected in: Parallel
Values: 1k 1k
Единица: Ω

Equivalent value: 500 Ω

Источник проверки: R/n for n equal resistors (OpenStax UP2 §10.2)

Three 100 nF in parallel

Components: Capacitors
Connected in: Parallel
Values: 100 100 100
Единица: nF

Equivalent value: 300 nF

Источник проверки: Sum: 300 nF

Вопросы

How do you calculate resistors in parallel?

Add the reciprocals and invert: 1/R = 1/R₁ + 1/R₂ + … . For two resistors this reduces to product over sum, R = R₁R₂/(R₁ + R₂), so 100 Ω and 220 Ω in parallel give 22,000/320 = 68.75 Ω. The total is always smaller than the smallest resistor, because each extra path carries more current.

What is the resistance of equal resistors in parallel?

Divide one resistor's value by the number of resistors: n equal resistors R in parallel give R/n. Two 1 kΩ resistors give 500 Ω and four 100 Ω resistors give 25 Ω. They share the current equally, so the power ratings add too: four ¼ W resistors in parallel can dissipate 1 W between them.

How do you add capacitors in series and in parallel?

In parallel, capacitances add directly: three 100 nF capacitors give 300 nF. In series, the reciprocals add, 1/C = 1/C₁ + 1/C₂, so 10 µF and 22 µF give 6.875 µF, less than the smaller part. Series capacitors carry the same charge, so the smaller capacitor takes the larger share of the voltage.

Do inductors add like resistors?

Yes, when their magnetic fields do not couple: L = L₁ + L₂ in series and 1/L = 1/L₁ + 1/L₂ in parallel, so 10 mH and 4.7 mH in series give 14.7 mH. Coils that share flux add or subtract a mutual-inductance term of 2M in series, depending on winding direction, which this calculator does not model.

Насколько точен «Series and parallel resistor calculator»?

Точность зависит от введённых данных и допущений метода. Десятичная арифметика использует 50 значащих цифр, но оценки, численные методы и исходные данные могут быть менее точными; округление на экране не устраняет эти ограничения. Решённые примеры, проверенные по независимым источникам: 7. Например, «100, 220, 470 Ω in series» проверяется по источнику Python 3.8 decimal: 100 + 220 + 470.

Откуда взята методика?

OpenStax University Physics Volume 2, §10.2 Resistors in series and parallel; §8.2 Capacitors in series and in parallel; HyperPhysics — Inductors in series and parallel (no mutual inductance).

Об этом калькуляторе

\text{Series: } R = \sum R_i,\ L = \sum L_i,\ \tfrac1C = \sum \tfrac1{C_i}\qquad \text{Parallel: } \tfrac1R = \sum \tfrac1{R_i},\ \tfrac1L = \sum \tfrac1{L_i},\ C = \sum C_i

Источники

Проверено по источникам

В калькулятор включены решённые примеры с ответами из независимых источников. Их количество: 7. Они входят в набор тестов, и вы также можете запустить их здесь.