Resistor colour code calculator

The first two bands are digits, the third is the multiplier and the fourth the tolerance. The digits run black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9. Yellow, violet, red, gold therefore reads 47 × 10² = 4,700 Ω, with gold meaning ±5%.

Start from the end away from the gold or silver band. Gold and silver have no digit value in IEC 60062; they only appear as a multiplier (×0.1 and ×0.01) or a tolerance (±5% and ±10%). The first band usually sits closer to its lead, and the tolerance band is often spaced apart from the others.

A 4-band resistor carries two significant digits, enough for the E6 to E24 values used for ±5% to ±20% parts. A 5-band resistor carries three digits for the E48 to E192 values of ±2% and tighter parts: brown, black, black, red, brown is 100 × 10² Ω = 10 kΩ ±1%. A 6-band resistor adds a temperature-coefficient band.

It gives the resistance drift per kelvin in parts per million: brown 100 ppm/K, red 50, yellow 25, green 20, orange 15, blue 10, violet 5 and grey 1. A 3.3 kΩ resistor with a red band changes by 3,300 × 50 × 10⁻⁶ = 0.165 Ω per degree, about 4.1 Ω over a 25 °C rise.

A missing tolerance band means ±20%. Brown, black, orange with no fourth band is 10 kΩ, and any value from 8 kΩ to 12 kΩ is within specification. Such parts come from the E6 series (1.0, 1.5, 2.2, 3.3, 4.7, 6.8), whose steps of about 47% suit the wide tolerance.

准确性取决于输入值和方法的假设。十进制运算使用50位有效数字，但估算、数值方法和源数据的精度可能较低；显示时的舍入并不能消除这些限制。 已按独立来源核验的计算示例：9。 例如，“Yellow violet red gold”根据IEC 60062 table: 4,7 × 10² Ω, gold = ±5%; 4700 × 0.95 / 1.05进行核验。

IEC 60062:2016 — Marking codes for resistors and capacitors (colour code, tolerance and TCR bands); IEC 60063:2015 — Preferred number series for resistors and capacitors (E series); Wikipedia — Electronic color code (summary of the IEC 60062 table).