F = ma calculator: force, friction and inclined plane

One newton is the force that gives a 1 kg mass an acceleration of 1 m/s², so 1 N = 1 kg·m/s² in the SI. A 1 kg mass weighs 9.80665 N under standard gravity, and one pound-force is exactly 4.4482216152605 N (NIST SP 811). A 100 lbf push that accelerates an object at 1 g therefore means a mass of 100 lb, or 45.36 kg.

Friction equals the coefficient of friction times the normal force, f = μN. On level ground N = mg, so a 10 kg crate with μk = 0.2 needs a 19.61 N push to keep sliding at constant speed. Static friction is a limit, not a fixed value: it matches the applied force up to μs × N, and the object starts to move once that limit is passed.

It starts to slide once the slope angle exceeds arctan μs, the point where the pull down the slope, mg sin θ, overtakes the most static friction can supply, μs mg cos θ. With μs = 0.7 that angle is 34.99°; with μs = 0.2 it is 11.31°. Tilting a surface until an object slips and reading the angle is a standard way to measure μs.

OpenStax University Physics Table 6.1 gives approximate values, static then kinetic: rubber on dry concrete 1.0 and 0.7, wood on wood 0.5 and 0.3, ice on ice 0.1 and 0.03. Real values shift with surface finish, moisture and temperature, so a measured coefficient beats a table value. The kinetic coefficient is lower than the static one for each of these pairs.

No. Mass cancels in a = g(sin θ − μk cos θ), because both the pull down the slope and the friction are proportional to the weight. A 5 kg block and a 50 kg block on a frictionless 45° slope both accelerate at 6.93 m/s². Differences seen in practice come from air resistance and from friction coefficients that change with load or speed.

准确性取决于输入值和方法的假设。十进制运算使用50位有效数字，但估算、数值方法和源数据的精度可能较低；显示时的舍入并不能消除这些限制。 已按独立来源核验的计算示例：6。 例如，“3000 N on a 1500 kg car”根据Python 3.8: a = F/m = 3000/1500进行核验。

OpenStax University Physics Volume 1, §5.3 Newton's second law and §6.2 Friction; HyperPhysics — Inclined plane with friction.