压力单位换算器

换算 psi 与 bar，以及 kPa、atm、hPa、mmHg 和 inHg，适用于轮胎、气象和血压读数，并展示精确的换算因子链。

更新于 2026年9月29日已验证的示例：4

转换后的数值

bar

有效数字：12；取最近值，等距时远离零

换算: 32 psi ≈ 2.206322 bar
换算系数: 0.0689475729317
精确性: 定义精确，结果为循环小数

32 psi约为2.206322 bar。一个磅每平方英寸约等于0.06894757 bar。

用各个单位表示同一个量

32 psi用各个压力单位表示行数：11

单位	数值	定义
pascal (Pa)	220,632.2	基本单位
hectopascal (hPa)	2,206.322	1 hPa = 100 Pa，精确值
千帕 (kPa)	220.6322	1 kPa = 1,000 Pa，精确值
megapascal (MPa)	0.2206322	1 MPa = 1,000,000 Pa，精确值
巴	2.206322	1 bar = 100,000 Pa，精确值
standard atmosphere (atm)	2.177471	1 atm = 101,325 Pa，精确值
磅每平方英寸 (psi)	32	1 psi = 4.4482216152605/0.00064516 Pa，精确值
millimetre of mercury (mmHg)	1,654.878	1 mmHg = 133.322387415 Pa，精确值
torr (Torr)	1,654.878	1 Torr = 101,325/760 Pa，精确值
inch of mercury (inHg)	65.15265	1 inHg = 3,386.389 Pa，近似值（0 °C 时的约定值）
kilogram-force per cm² (kgf/cm²)	2.249823	1 kgf/cm² = 98,066.5 Pa，精确值

计算方法 S

将磅每平方英寸换算为pascal
$32\ \text{psi} \times \tfrac{4.4482216152605}{0.00064516}\ \tfrac{\text{Pa}}{\text{psi}} = 220{,}632.233381\ \text{Pa}$
1 psi = 4.4482216152605/0.00064516 Pa，精确值
将pascal换算为巴
$220{,}632.233381\ \text{Pa} \div 100{,}000\ \tfrac{\text{Pa}}{\text{bar}} = 2.20632233381\ \text{bar}$
1 bar = 100,000 Pa，精确值
合并换算系数
$1\ \text{psi} = \frac{\tfrac{4.4482216152605}{0.00064516}}{100{,}000}\ \text{bar} \approx 0.0689475729317\ \text{bar}$
两个单位的定义都精确，但换算结果为循环小数；结果显示12位有效数字。

关于压力单位换算器

Each pressure unit is a fixed number of pascals (newtons per square metre). The bar is exactly 100,000 Pa, the standard atmosphere 101,325 Pa and the torr 1/760 atm. The psi, one pound-force per square inch, is about 6,894.757 Pa, fixed exactly by the 1959 pound, standard gravity (9.80665 m/s²) and the 25.4 mm inch.

The default converts a 32 psi tyre pressure to 2.2063 bar. Weather maps use hectopascals (1 hPa = 1 mbar; standard sea-level pressure is 1,013.25 hPa), and blood pressure is recorded in millimetres of mercury.

Gauge and absolute readings convert with the same factor but are not interchangeable: a tyre gauge shows pressure above the surrounding air, so 32 psi on the gauge is about 46.7 psi absolute at sea level. The inch of mercury uses the conventional value at 0 °C and is marked approximate.

计算示例

32 psi tyre pressure in bar

数值: 32 psi
从: pound per square inch (psi)
到: 巴

转换后的数值: 2.2063223338 bar

核验来源：1 psi = 4.4482216152605 N ÷ (0.0254 m)² (NIST SP 811 App. B); 32 psi = 8896443230521/4032250000000 bar (Python 3.8 fractions from the legal definitions)

1 atm in psi

数值: 1 atm
从: standard atmosphere (atm)
到: pound per square inch (psi)

转换后的数值: 14.6959487755 psi

核验来源：101325 Pa ÷ 6894.757293168… Pa (Python 3.8 fractions from the legal definitions)

760 torr is 1 atm

数值: 760 Torr
从: torr (Torr)
到: standard atmosphere (atm)

转换后的数值: 1 atm
精确性: 精确

核验来源：1 torr = 101325/760 Pa by definition (NIST SP 811 App. B)

1 inHg (conventional value)

数值: 1 inHg
从: inch of mercury (inHg)
到: pascal (Pa)

转换后的数值: 3,386.389 Pa
精确性: 近似

核验来源：NIST SP 811 App. B.9: inch of mercury (0 °C) = 3.386389 E+03 Pa

常见问题

How do I convert psi to bar?

Divide by 14.5038, or multiply by 0.0689476. A bar is 100,000 Pa and a psi 6,894.757 Pa, so 1 bar = 14.5038 psi. A 32 psi tyre is 2.2063 bar, and a 2.5 bar tyre is 36.26 psi.

Is 1 bar the same as 1 atmosphere?

No, though they are within 1.3%. The bar is exactly 100,000 Pa, while the standard atmosphere is exactly 101,325 Pa, which is 1.01325 bar, 14.696 psi or 760 mmHg. The atmosphere was set to match average sea-level air pressure, which is why weather charts centre on 1,013.25 hPa.

What is the difference between psig and psia?

psig is gauge pressure, measured relative to the surrounding air; psia is absolute pressure, measured from a vacuum. At sea level psia = psig + 14.696. Tyre and compressor gauges read psig, so a flat tyre shows 0 psig while still holding 14.7 psia of air. The converter treats both alike, so keep input and output the same kind.

Are mmHg and torr the same?

Almost. A torr is exactly 1/760 of a standard atmosphere, 133.322368 Pa, while the conventional millimetre of mercury is 133.322387415 Pa; they differ by about 0.14 parts per million. For blood pressure the difference never matters: 120/80 mmHg is 16.0/10.7 kPa either way.

How do I convert inches of mercury to hPa?

Multiply by 33.8639: 29.92 inHg is 1,013.2 hPa, the standard altimeter setting in US aviation. This converter uses the conventional inch of mercury at 0 °C, 3,386.389 Pa (NIST SP 811), and marks results that use it as approximate because mercury's density changes with temperature.

“压力单位换算器”有多准确？

准确性取决于输入值和方法的假设。十进制运算使用50位有效数字，但估算、数值方法和源数据的精度可能较低；显示时的舍入并不能消除这些限制。已按独立来源核验的计算示例：4。例如，“32 psi tyre pressure in bar”根据1 psi = 4.4482216152605 N ÷ (0.0254 m)² (NIST SP 811 App. B); 32 psi = 8896443230521/4032250000000 bar (Python 3.8 fractions from the legal definitions)进行核验。

这种方法出自哪里？

NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors; NIST Handbook 44, Appendix C — General tables of units of measurement.

关于此计算器

\begin{gathered} x_{\text{to}} = x_{\text{from}} \times \dfrac{f_{\text{from}}}{f_{\text{to}}} \\ f = \text{one unit expressed in } \text{Pa} \end{gathered}

来源

已对照来源验证

此计算器包含 4 个已解示例，答案来自独立来源。这些示例会在测试套件中运行，你也可以在此运行验证。