CalcOpenly
English

Yards to meters converter

Convert yards to meters (yards to meters) with the exact factor, a conversion chart and worked steps.

Drafted with AI writing toolsUpdated Checked examples: 3

yd
Try
Meters
m
Meters: 91.44 m
Significant figures: 12; Nearest, ties away from zero
Conversion
100 yd = 91.44 m
1 m in yards
1.093613298yd

100 yd is about 91.44 m. In the other direction, 1 m ≈ 1.0936133 yd.

Yards to meters

0100200300400100200300400ydm100 → 91.44
Yards to meters chart Rows: 11
YardsMeters
0.50.4572
10.9144
21.8288
32.7432
54.572
109.144
2522.86
5045.72
10091.44
220201.168
440402.336
How it's calculated S

  1. Conversion factor

    1 yd=0.9144 m1\ \text{yd} = 0.9144\ \text{m}

    Exact by definition.

  2. Multiply

    100×0.9144=91.44 m100 \times 0.9144 = 91.44\ \text{m}

About the yards to meters converter

To convert yards to meters, multiply by 0.9144; to convert back, multiply by 1.0936132983. For example, 100 yd is about 91.44 m. Displayed factors and results may be rounded.

Yards appear in fabric orders, field markings and short outdoor distances. A quoted number of yards describes length unless the source explicitly says square or cubic yards. Confirm that the measured quantity and the unit on the purchase order describe the same thing.

International definition of yard: 1 yd = 3 ft = 0.9144 m. These values are exact.

Both units are defined exactly. Calculations use 50 significant digits and round only for display.

How to convert yards to meters

Multiply yards by 0.9144. The international yard is exactly 0.9144 m, so 100 yd = 91.44 m and 25 yd = 22.86 m, with nothing rounded. Use it for fabric bought by the yard, sports fields and pools, and golf or running distances given in yards.

The yard has been exactly 0.9144 m since July 1, 1959, following a 1958 agreement among English-speaking nations to unify their length and mass standards, as NIST's length reference explains.

Yards to meters chart

YardsMeters
0.50.4572
10.9144
32.7432
2522.86
10091.44
220201.168

Every value is exact. 220 yd is a furlong, and the 100 yards between the goal lines of an American football field are 91.44 m.

Yards, feet and inches to meters

A yard is 3 feet or 36 inches, so a third of a yard is 1 ft (0.3048 m) and a quarter is 9 in (0.2286 m). Turn a mixed measurement into yards first, then multiply:

  • 2 yd 1 ft is 2⅓ yd: 2⅓ × 0.9144 = 2.1336 m. Type it as 2+1/3.
  • 2 yd 9 in is 2¼ yd: 2.25 × 0.9144 = 2.0574 m.
  • 2.1 yd is not 2 yd 1 ft. It is two yards and a tenth, 1.92024 m.

Fabric by the yard

Add the pieces before converting: three cuts of 1½ yd are 4½ yd, which is 4.1148 m. Each eighth of a yard is 4.5 in, or 11.43 cm, so a pattern's 2⅛ yd is 1.9431 m.

Square yards and cubic yards

Area and volume need the factor squared or cubed:

  • 1 sq yd = 0.9144² = 0.83612736 m².
  • 1 cu yd = 0.9144³ = 0.764554857984 m³.

So 10 cubic yards of gravel or concrete is about 7.65 m³, not 9.144 m³. The area converter and volume converter handle these units.

Common mistakes

  • Rounding the factor to 0.91. 25 yd comes out as 22.75 m, 11 cm short of 22.86 m.
  • Estimating with 0.9. Answers run 1.6% low: 100 yd becomes 90 m instead of 91.44 m.
  • Treating yards and meters as equal. A 100 yd course is 8.56 m shorter than a 100 m course.
  • Dividing by 0.9144. That is the meters-to-yards direction. A yard is shorter than a meter, so the meter figure is always the smaller number.

For the opposite direction, use meters to yards. For feet, use feet to meters, and for miles or inches, the length converter.

Worked examples

100 yd to m

Yards (yd)
100 yd
Meters
91.44 m

Checked against: Exact-fraction computation from the legal unit definitions

3 yd to m

Yards (yd)
3 yd
Meters
2.7432 m

Checked against: Exact-fraction computation from the legal unit definitions

220 yd to m

Yards (yd)
220 yd
Meters
201.168 m

Checked against: Exact-fraction computation from the legal unit definitions

Questions

How many meters are in one yard?

1 yd is about 0.9144 m. International definition of yard: 1 yd = 3 ft = 0.9144 m. These values are exact.

How do I convert yards to meters?

Multiply by 0.9144: 100 yd × 0.9144 ≈ 91.44 m. To convert back, divide by the same factor. The factor shown may be rounded.

How can I estimate yards in meters without a calculator?

Multiply by 0.9. This is 1.6% below the exact factor (about 0.9144), so 100 yd comes out as 90 m instead of 91.44 m.

About this calculator

m=yd×0.9144\text{m} = \text{yd} \times 0.9144

Sources

  1. NIST SP 811 (2008), Guide for the Use of the International System of Units, Appendix B
  2. NIST Handbook 44, Appendix C: General tables of units of measurement
  3. BIPM, The International System of Units (SI Brochure), 9th edition

Checked against references

This calculator includes 3 worked examples with independently sourced answers. They run in the test suite, and you can run them here too.

Put this calculator on your site

Paste this where you want the calculator to appear. It is free to use, it stays in step with corrections made here, and the credit line below it links back so your readers can find the full version.

Height
Preview the embed

Keep the credit line. It is the only condition, and it is what keeps these calculators free.

Related calculators