⁦CSS⁩ اکائی کنورٹر (⁦px⁩ سے ⁦rem⁩، ⁦em⁩، ⁦pt⁩)

روٹ عنصر کے فونٹ سائز، پیرنٹ عنصر کے فونٹ سائز اور ⁦DPI⁩ سے ⁦px⁩ کو ⁦rem⁩، ⁦em⁩، ⁦pt⁩، پائیکا، انچ اور ⁦mm⁩ میں بدلیں۔ ⁦CSS⁩ میں ⁦1 in = 96 px = 72 pt⁩ مقرر ہے۔

تازہ کاری جانچی گئی مثالیں: 7

px
مزید اختیارات
px
DPI
CSS fixes 1 in = 96 px. Enter a screen or printer density (e.g. 300) to count physical pixels instead.
آزمائیں
تبدیل شدہ قدر
rem
تبدیل شدہ قدر: 1.5 rem
بامعنی ہندسے: 10؛ قریب ترین؛ برابر فاصلے پر صفر سے دور
As CSS
1.5rem
In pixels
24px

24px is 1.5rem with a 16 px root font and 96 pixels per inch.

Size in pixels next to the font sizes

24px24 px1 rem (root)16 px1 em (parent)16 px
24px in every unit قطاریں: 10
اکائیقدرتعریف
Pixels (px)24px1 px
Points (pt)18pt1 pt = 1/72 in
Picas (pc)1.5pc1 pc = 12 pt = 1/6 in
Inches (in)0.25in1 in = DPI px
Centimetres (cm)0.635cm1 cm = 1/2.54 in
Millimetres (mm)6.35mm1 mm = 1/25.4 in
Quarter-millimetres (Q)25.4Q1 Q = 0.25 mm
em (parent font size)1.5em1 em = parent font size
rem (root font size)1.5rem1 rem = root font size
Percent of parent font size (%)150%100% = parent font size
حساب کا طریقہ S
  1. Pixels in one px

    1 px=1 px1\,\text{px} = 1\ \text{px}

    1 px

  2. Value in pixels

    24×1=24 px24 \times 1 = 24\ \text{px}
  3. Divide by pixels in one rem

    2416=1.5 rem\frac{24}{16} = 1.5\ \text{rem}

    1 rem = root font size

⁦CSS⁩ اکائی کنورٹر (⁦px⁩ سے ⁦rem⁩، ⁦em⁩، ⁦pt⁩) کے بارے میں

CSS converts every length through pixels. The absolute units are fixed to each other: 1 in = 2.54 cm = 96 px = 72 pt = 6 pc, and 1 Q is a quarter of a millimetre. The font-relative units depend on the page: 1 rem is the root element's font size, and when you set font-size, 1 em (or 100%) is the parent's font size. The converter turns the value into pixels, then divides by the pixels in one target unit.

Front-end developers use it to turn a design's pixel sizes into rem, so text follows the reader's browser font setting: with the default 16 px root, 24 px is 1.5 rem. Print designers use the pixels-per-inch field instead; at 300 DPI a 10 mm logo needs about 118 pixels.

On screens a CSS inch is not a measured inch. Browsers anchor 96 px to a reference pixel of about 0.0213° of visual angle, so physical units match a ruler only in print.

حل شدہ مثالیں

24 px in rem

قدر
24
سے
Pixels (px)
میں
rem (root font size)
Root font size (for rem)
16 px
تبدیل شدہ قدر
1.5 rem
As CSS
1.5rem
In pixels
24 px

جانچ کا ماخذ: ⁨CSS Values 3 §6.1: 1rem = root font size (16 px browser default); 24 / 16 = 1.5⁩

12 pt in px

قدر
12
سے
Points (pt)
میں
Pixels (px)
Root font size (for rem)
16 px
تبدیل شدہ قدر
16 px
As CSS
16px

جانچ کا ماخذ: ⁨CSS Values 3 §6.2: 1pt = 1/72 in, 1in = 96px; 12 × 96/72 = 16⁩

1 inch in CSS pixels

قدر
1
سے
انچ (⁨in⁩)
میں
Pixels (px)
Root font size (for rem)
16 px
تبدیل شدہ قدر
96 px

جانچ کا ماخذ: ⁨CSS Values 3 §6.2: 1in = 96px⁩

1.5 rem in px

قدر
1.5
سے
rem (root font size)
میں
Pixels (px)
Root font size (for rem)
16 px
تبدیل شدہ قدر
24 px

جانچ کا ماخذ: ⁨1 rem = root font size (16 px); 1.5 × 16⁩

سوالات

How many pixels is 1 rem?

16 pixels by default. One rem equals the font size of the root html element, and the major browsers set that to 16 px unless the reader changes the default font size or the stylesheet sets html { font-size }. Setting html { font-size: 62.5% } makes 1 rem = 10 px. The W3C CSS Values and Units specification defines rem; the 16 px figure is the browser default, not part of the specification.

How do I convert px to pt?

Multiply pixels by 0.75; to go from points to pixels, multiply by 4/3 (about 1.333). Both factors follow from the W3C CSS rule 1 in = 96 px = 72 pt, so 1 px = 72/96 pt. Body text at 16 px is 12 pt, and 11 pt text from a word processor is about 14.67 px.

What is the difference between em and rem?

rem always refers to the root element's font size; em refers to the current element's font size, or to the parent's when used on font-size itself. So em compounds when nested: a list set to 1.2em inside another list set to 1.2em has text 1.44 times the outer size, while 1.2rem stays at 19.2 px with a 16 px root however deep it sits.

Should I use px or rem for font sizes?

Use rem if text should follow the reader's browser font-size setting. Page zoom enlarges px and rem alike, but the default font-size preference changes only rem, em and percentage sizes. WCAG 2.1 success criterion 1.4.4 (level AA) requires text that can be resized to 200% without loss of content or function; browser zoom can meet it with px, and rem also honours the font-size preference.

Is a CSS inch the same as a real inch?

Only in print. CSS defines 1 in as exactly 96 px, and on screens browsers anchor the pixel to the W3C reference pixel: one pixel of a 96 DPI screen seen from 28 in away, a visual angle of about 0.0213°. Phones are held closer and use smaller pixels, so a 96 px box measures well under an inch on most phones. Printers anchor to physical units, so 1 in prints as 25.4 mm.

“⁨⁦CSS⁩ اکائی کنورٹر (⁦px⁩ سے ⁦rem⁩، ⁦em⁩، ⁦pt⁩)⁩” کتنا درست ہے؟

درستی آپ کی درج کردہ قدروں اور طریقے کے مفروضوں پر منحصر ہے۔ اعشاری حساب 50 بامعنی ہندسے استعمال کرتا ہے، مگر تخمینے، عددی طریقے اور ماخذ کا ڈیٹا کم درست ہو سکتے ہیں؛ دکھائی گئی قدروں کو راؤنڈ کرنے سے یہ حدود ختم نہیں ہوتیں۔ آزاد ذرائع کی حل شدہ مثالوں سے جانچ: 7۔ مثلاً، “⁨24 px in rem⁩” کو ⁨CSS Values 3 §6.1: 1rem = root font size (16 px browser default); 24 / 16 = 1.5⁩ سے جانچا جاتا ہے۔

اس طریقے کا ماخذ کیا ہے؟

W3C — CSS Values and Units Module Level 3, §6.2 absolute lengths and §6.1 font-relative lengths.

اس کیلکولیٹر کے بارے میں

to=value×px per from-unitpx per to-unit1 in=96 px=72 pt=2.54 cm\begin{gathered} \text{to} = \text{value} \times \frac{\text{px per from-unit}}{\text{px per to-unit}} \\ 1\,\text{in} = 96\,\text{px} = 72\,\text{pt} = 2.54\,\text{cm} \end{gathered}

ماخذ

  1. W3C — CSS Values and Units Module Level 3, §6.2 absolute lengths and §6.1 font-relative lengths

حوالوں سے جانچ شدہ

اس کیلکولیٹر میں آزاد ذرائع سے حاصل کردہ جوابات والی 7 حل شدہ مثالیں شامل ہیں۔ یہ ٹیسٹ مجموعے میں چلتی ہیں اور آپ انہیں یہاں بھی چلا سکتے ہیں۔

متعلقہ کیلکولیٹر