100 hp in kW
- القيمة
- 100 hp
- من
- horsepower (hp)
- إلى
- kilowatt (kW)
- القيمة بعد التحويل
- 74.5699871582 kW
- الدقة
- دقيق
مصدر التحقق: 1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B)
حوّل hp إلى kW، وkW إلى hp، والواط إلى حصان، وBTU/h إلى طن تبريد، مع الحصان الميكانيكي (745.7 W) والحصان المتري (735.5 W).
آخر تحديث أمثلة تم التحقق منها: 5
تساوي 100 hp نحو 74.56999 kW (بالضبط 74.569987158227022 kW). وحدة واحدة من حصان ميكانيكي تساوي نحو 0.7456999 kW.
| الوحدة | القيمة | التعريف |
|---|---|---|
| watt (W) | 74,569.99 | الوحدة الأساسية |
| milliwatt (mW) | 74,569,990 | 1 mW = 0.001 W، دقيق |
| كيلوواط (kW) | 74.56999 | 1 kW = 1,000 W، دقيق |
| megawatt (MW) | 0.07456999 | 1 MW = 1,000,000 W، دقيق |
| gigawatt (GW) | 0.00007456999 | 1 GW = 1,000,000,000 W، دقيق |
| حصان ميكانيكي (hp) | 100 | 1 hp = 745.69987158227022 W، دقيق (حصان ميكانيكي (550 ft·lbf/s)) |
| metric horsepower (PS) | 101.387 | 1 PS = 735.49875 W، دقيق |
| BTU per hour (BTU/h) | 254,443.4 | 1 BTU/h = 1,055.05585262/3,600 W، دقيق |
| ton of refrigeration (TR) | 21.20361 | 1 TR = 12,660,670.23144/3,600 W، دقيق |
| kilocalorie per hour (kcal/h) | 64,161.56 | 1 kcal/h = 4,184/3,600 W، دقيق |
1 hp = 745.69987158227022 W، دقيق (حصان ميكانيكي (550 ft·lbf/s))
1 kW = 1,000 W، دقيق
الوحدتان معرفتان بدقة والقيمة المحولة عدد عشري منتهٍ، لذا فإن كل رقم معروض فيها دقيق.
Every power unit is a fixed number of watts (joules per second). Mechanical horsepower is 550 foot-pounds-force per second, which works out at exactly 745.69987158227022 W; metric horsepower (PS) is 75 kilogram-force metres per second, exactly 735.49875 W. A ton of refrigeration is 12,000 BTU/h, about 3.517 kW.
The default converts a 100 hp engine to 74.57 kW. Car specifications are the usual reason: European registration documents give engine power in kW while brochures quote PS or hp, and 100 kW is 134.1 hp or 136.0 PS.
Air-conditioner ratings in BTU/h or tons describe cooling output, not the electricity drawn: a 1.5-ton unit moves 18,000 BTU/h (5.28 kW) of heat, and its electrical input depends on its efficiency rating.
مصدر التحقق: 1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B)
مصدر التحقق: 1000 / 745.69987158227022 (Python 3.8 fractions from the legal definitions)
مصدر التحقق: 1 ton of refrigeration = 12,000 BTU/h (NIST SP 811 App. B)
مصدر التحقق: 0 × any factor = 0
745.7 W for mechanical horsepower (550 ft·lbf/s), 735.5 W for metric horsepower (PS or CV), and exactly 746 W for the electric horsepower used to rate electric motors; NIST SP 811 lists all three. Mechanical and metric horsepower differ by 1.4%, enough to matter when comparing car figures.
Multiply by 1.34102 for mechanical horsepower or by 1.35962 for metric PS. A 150 kW engine is 201.2 hp or 203.9 PS. To go from hp to kW, multiply by 0.7457, so the default 100 hp is 74.57 kW.
hp and bhp use the same 745.7 W unit; “brake” horsepower means the power was measured at the engine's output shaft, before transmission losses. PS (Pferdestärke) is metric horsepower, 735.5 W, also written CV or ch. A car quoted at 150 PS makes 147.9 hp or 110.3 kW.
It removes 18,000 BTU of heat per hour, which is 5.28 kW of cooling. A ton of refrigeration is 12,000 BTU/h, the rate that melts one short ton (2,000 lb) of ice in 24 hours, because ice absorbs 144 BTU per pound as it melts. The electricity it draws is lower and depends on its efficiency rating.
3,412.14 BTU/h. One watt is 3.41214 BTU/h, so a 2 kW electric heater gives out 6,824 BTU/h, and a 12,000 BTU/h air conditioner is rated at 3.517 kW of cooling. The factor is the same as between kWh and BTU because both sides are divided by one hour.
تعتمد الدقة على مدخلاتك وافتراضات الطريقة. يستخدم الحساب العشري 50 رقمًا معنويًا، لكن التقديرات والأساليب العددية وبيانات المصدر قد تكون أقل دقة؛ تقريب القيم المعروضة لا يزيل هذه الحدود. أمثلة محلولة جرى التحقق منها بمصادر مستقلة: 5. مثلًا، يجري التحقق من «100 hp in kW» بالرجوع إلى 1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B).
NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors; NIST Handbook 44, Appendix C — General tables of units of measurement.
تتضمن هذه الحاسبة أمثلة محلولة بإجابات من مصادر مستقلة، وعددها 5. تُشغّل ضمن مجموعة الاختبارات، ويمكنك تشغيلها هنا أيضًا.
حوّل psi إلى bar، وbar إلى psi، ووحدات kPa وatm وhPa وmmHg وinHg لقراءات الإطارات والطقس وضغط الدم، مع سلسلة عوامل التحويل الدقيقة.
حوّل kWh إلى BTU، والسعرات الحرارية إلى جول، وkcal إلى kJ، والثيرم إلى kWh، باستخدام التعريفات الدقيقة للجول والسعرة الحرارية والوحدة الحرارية البريطانية والإلكترون فولت.
Convert kgf to newtons, lbf to N and kN to kgf or lbf, using standard gravity (9.80665 m/s²) and the exact pound-force of 4.4482216152605 N.
حوّل N·m إلى lb-ft، وlb-ft إلى N·m، ووحدتي lb-in وkgf·m لمواصفات مفاتيح العزم والمسامير، باستخدام 1 lbf·ft = 1.3558179483314004 N·m بالضبط.
حوّل الدرجات إلى راديان والعكس، وكذلك الغراد والدقائق والثواني القوسية والدورات والملّي راديان، مع استخدام π بدقة 50 رقمًا.
Convert rpm to Hz, Hz to rpm, BPM to Hz, GHz to MHz and hertz to radians per second (ω = 2πf), from Hz to THz.