100 hp in kW
- 値
- 100 hp
- 変換元
- horsepower (hp)
- 変換先
- kilowatt (kW)
- 変換後の値
- 74.5699871582 kW
- 正確さ
- 正確
照合元:1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B)
100 hpは約74.56999 kWです(正確には74.569987158227022 kW)。 1単位の英馬力は約0.7456999 kWです。
| 単位 | 値 | 定義 |
|---|---|---|
| watt (W) | 74,569.99 | 基本単位 |
| milliwatt (mW) | 74,569,990 | 1 mW = 0.001 W、正確な値 |
| キロワット (kW) | 74.56999 | 1 kW = 1,000 W、正確な値 |
| megawatt (MW) | 0.07456999 | 1 MW = 1,000,000 W、正確な値 |
| gigawatt (GW) | 0.00007456999 | 1 GW = 1,000,000,000 W、正確な値 |
| 英馬力 (hp) | 100 | 1 hp = 745.69987158227022 W、正確な値(機械馬力(550 ft·lbf/s)) |
| metric horsepower (PS) | 101.387 | 1 PS = 735.49875 W、正確な値 |
| BTU per hour (BTU/h) | 254,443.4 | 1 BTU/h = 1,055.05585262/3,600 W、正確な値 |
| ton of refrigeration (TR) | 21.20361 | 1 TR = 12,660,670.23144/3,600 W、正確な値 |
| kilocalorie per hour (kcal/h) | 64,161.56 | 1 kcal/h = 4,184/3,600 W、正確な値 |
1 hp = 745.69987158227022 W、正確な値(機械馬力(550 ft·lbf/s))
1 kW = 1,000 W、正確な値
両方の単位の定義が正確で、変換後の値は有限小数なので、表示されるすべての桁が正確です。
Every power unit is a fixed number of watts (joules per second). Mechanical horsepower is 550 foot-pounds-force per second, which works out at exactly 745.69987158227022 W; metric horsepower (PS) is 75 kilogram-force metres per second, exactly 735.49875 W. A ton of refrigeration is 12,000 BTU/h, about 3.517 kW.
The default converts a 100 hp engine to 74.57 kW. Car specifications are the usual reason: European registration documents give engine power in kW while brochures quote PS or hp, and 100 kW is 134.1 hp or 136.0 PS.
Air-conditioner ratings in BTU/h or tons describe cooling output, not the electricity drawn: a 1.5-ton unit moves 18,000 BTU/h (5.28 kW) of heat, and its electrical input depends on its efficiency rating.
照合元:1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B)
照合元:1000 / 745.69987158227022 (Python 3.8 fractions from the legal definitions)
照合元:1 ton of refrigeration = 12,000 BTU/h (NIST SP 811 App. B)
照合元:0 × any factor = 0
745.7 W for mechanical horsepower (550 ft·lbf/s), 735.5 W for metric horsepower (PS or CV), and exactly 746 W for the electric horsepower used to rate electric motors; NIST SP 811 lists all three. Mechanical and metric horsepower differ by 1.4%, enough to matter when comparing car figures.
Multiply by 1.34102 for mechanical horsepower or by 1.35962 for metric PS. A 150 kW engine is 201.2 hp or 203.9 PS. To go from hp to kW, multiply by 0.7457, so the default 100 hp is 74.57 kW.
hp and bhp use the same 745.7 W unit; “brake” horsepower means the power was measured at the engine's output shaft, before transmission losses. PS (Pferdestärke) is metric horsepower, 735.5 W, also written CV or ch. A car quoted at 150 PS makes 147.9 hp or 110.3 kW.
It removes 18,000 BTU of heat per hour, which is 5.28 kW of cooling. A ton of refrigeration is 12,000 BTU/h, the rate that melts one short ton (2,000 lb) of ice in 24 hours, because ice absorbs 144 BTU per pound as it melts. The electricity it draws is lower and depends on its efficiency rating.
3,412.14 BTU/h. One watt is 3.41214 BTU/h, so a 2 kW electric heater gives out 6,824 BTU/h, and a 12,000 BTU/h air conditioner is rated at 3.517 kW of cooling. The factor is the same as between kWh and BTU because both sides are divided by one hour.
精度は入力値と計算方法の前提に依存します。十進演算には有効数字50桁を使いますが、推定、数値計算手法、元データの精度はそれより低い場合があります。表示の丸め処理でこれらの制約がなくなるわけではありません。 独立した出典の解答と照合した計算例:5。 例えば、「100 hp in kW」は1 hp = 550 ft·lbf/s = 550 × 0.3048 × 4.4482216152605 W = 745.69987158227022 W (NIST SP 811 App. B)と照合しています。
NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors; NIST Handbook 44, Appendix C — General tables of units of measurement.
この計算機には、独立した出典の解答を使った計算例が 5 件あります。テストに組み込まれており、ここでも実行できます。
タイヤ、気象、血圧の測定値について、psi から bar、bar から psi、kPa、atm、hPa、mmHg、inHg に換算し、正確な換算係数の連鎖を示します。
ジュール、カロリー、英熱量、電子ボルトの正確な定義を使い、kWh から BTU、カロリーからジュール、kcal から kJ、サームから kWh に換算します。
Convert kgf to newtons, lbf to N and kN to kgf or lbf, using standard gravity (9.80665 m/s²) and the exact pound-force of 4.4482216152605 N.
トルクレンチやボルトの仕様に合わせ、N·m と lb-ft、lb-in、kgf·m を換算します。正確な関係 1 lbf·ft = 1.3558179483314004 N·m を使います。
度とラジアンを相互に換算し、グラード、角分、角秒、回転、ミリラジアンにも対応。πは50桁で計算します。
Convert rpm to Hz, Hz to rpm, BPM to Hz, GHz to MHz and hertz to radians per second (ω = 2πf), from Hz to THz.