180 cm to ft
- Centimeters (cm)
- 180 cm
- Feet
- 5.905511811 ft
Checked against: Exact-fraction computation from the legal unit definitions
Convert centimeters to feet (cm to feet) with the exact factor, a conversion chart and worked steps.
By AdminDrafted with AI writing toolsUpdated Checked examples: 3
180 cm is about 5.905511811 ft. In the other direction, 1 ft ≈ 30.48 cm.
| Centimeters | Feet |
|---|---|
| 150 | 4.9213 |
| 155 | 5.0853 |
| 160 | 5.2493 |
| 165 | 5.4134 |
| 170 | 5.5774 |
| 175 | 5.7415 |
| 180 | 5.9055 |
| 185 | 6.0696 |
| 190 | 6.2336 |
| 195 | 6.3976 |
| 200 | 6.5617 |
Rounded here for display; the calculation uses 50 significant digits.
To convert centimeters to feet, multiply by 0.032808399; to convert back, multiply by 30.48. For example, 180 cm is about 5.905512 ft. Displayed factors and results may be rounded.
A centimeter measurement often comes from a tape used for furniture, clothing or body height. Keep the full reading, including a decimal part, when comparing it with a specification written in another unit. A decimal length is different from a feet-and-inches notation.
centimetre: 1 cm = 1/100 m. The metre is the SI base unit of length.
Both units are defined exactly. Calculations use 50 significant digits and round only for display.
Divide centimeters by 30.48, the exact number of centimeters in a foot. 170 cm ÷ 30.48 ≈ 5.5774 ft, which is 5 ft 6.93 in, or 5 ft 7 in to the nearest inch. Dividing gives decimal feet; heights are usually said in feet and inches, which takes one more step.
NIST's length conversion tables give the foot as 12 inches and the inch as exactly 2.54 cm, so a foot is 12 × 2.54 = 30.48 cm.
If the inches round to 12, write one more foot and 0 inches.
Decimal feet are rounded to four places and the inches to two.
| Centimeters (cm) | Decimal feet (rounded) | Feet and inches (rounded) |
|---|---|---|
| 1 | 0.0328 | 0 ft 0.39 in |
| 60 | 1.9685 | 1 ft 11.62 in |
| 70 | 2.2966 | 2 ft 3.56 in |
| 80 | 2.6247 | 2 ft 7.50 in |
| 100 | 3.2808 | 3 ft 3.37 in |
| 120 | 3.9370 | 3 ft 11.24 in |
| 140 | 4.5932 | 4 ft 7.12 in |
| 150 | 4.9213 | 4 ft 11.06 in |
| 151 | 4.9541 | 4 ft 11.45 in |
| 153 | 5.0197 | 5 ft 0.24 in |
| 154 | 5.0525 | 5 ft 0.63 in |
| 155 | 5.0853 | 5 ft 1.02 in |
| 156 | 5.1181 | 5 ft 1.42 in |
| 157 | 5.1509 | 5 ft 1.81 in |
| 158 | 5.1837 | 5 ft 2.20 in |
| 159 | 5.2165 | 5 ft 2.60 in |
| 160 | 5.2493 | 5 ft 2.99 in |
| 161 | 5.2822 | 5 ft 3.39 in |
| 162 | 5.3150 | 5 ft 3.78 in |
| 163 | 5.3478 | 5 ft 4.17 in |
| 164 | 5.3806 | 5 ft 4.57 in |
| 165 | 5.4134 | 5 ft 4.96 in |
| 166 | 5.4462 | 5 ft 5.35 in |
| 167 | 5.4790 | 5 ft 5.75 in |
| 168 | 5.5118 | 5 ft 6.14 in |
| 169 | 5.5446 | 5 ft 6.54 in |
| 170 | 5.5774 | 5 ft 6.93 in |
| 172 | 5.6430 | 5 ft 7.72 in |
| 173 | 5.6759 | 5 ft 8.11 in |
| 174 | 5.7087 | 5 ft 8.50 in |
| 175 | 5.7415 | 5 ft 8.90 in |
| 176 | 5.7743 | 5 ft 9.29 in |
| 177 | 5.8071 | 5 ft 9.69 in |
| 178 | 5.8399 | 5 ft 10.08 in |
| 179 | 5.8727 | 5 ft 10.47 in |
| 180 | 5.9055 | 5 ft 10.87 in |
| 181 | 5.9383 | 5 ft 11.26 in |
| 182 | 5.9711 | 5 ft 11.65 in |
| 183 | 6.0039 | 6 ft 0.05 in |
| 185 | 6.0696 | 6 ft 0.83 in |
| 200 | 6.5617 | 6 ft 6.74 in |
The decimal part is a fraction of a foot. 5.7 ft is 5 ft plus 0.7 × 12 = 8.4 in. Five feet seven inches is 5 7/12 ft, about 5.5833 ft, which is exactly 170.18 cm.
For the opposite direction, use feet to cm. For total inches, use cm to inches, and for a height rounded to whole inches alongside weight, the height converter.
Checked against: Exact-fraction computation from the legal unit definitions
Checked against: Exact-fraction computation from the legal unit definitions
Checked against: Exact-fraction computation from the legal unit definitions
1 cm is about 0.032808399 ft. centimetre: 1 cm = 1/100 m. The metre is the SI base unit of length.
Multiply by 0.032808399: 180 cm × 0.032808399 ≈ 5.905512 ft. To convert back, divide by the same factor. The factor shown may be rounded.
Multiply by 0.033. This is 0.6% above the exact factor (about 0.032808399), so 180 cm comes out as 5.94 ft instead of 5.9055 ft.
This calculator includes 3 worked examples with independently sourced answers. They run in the test suite, and you can run them here too.