Convert grams to moles and particles for any chemical formula, and find the limiting reagent, theoretical yield and leftover excess of a balanced reaction.
Cập nhật Ví dụ đã kiểm tra: 7
36.03 g of H₂O is 2 mol, or 1.204 × 10²⁴ particles.
N_A is exact in the SI since 2019.
The amount of substance links mass to particle count: n = m/M, where M is the molar mass worked out from the formula, and N = n × N_A, where the Avogadro constant N_A is 6.022 140 76 × 10²³ per mole. In limiting-reagent mode, each reactant's moles are divided by its coefficient in the balanced equation; the smallest quotient is how far the reaction can run, and it sets the theoretical yield of product.
Typical uses are weighing out reagents and predicting product mass before an experiment. The default, 36.03 g of water, is 2 mol, or 1.204 × 10²⁴ molecules. For 2 H₂ + O₂ → 2 H₂O with 10 g of hydrogen and 64 g of oxygen, oxygen runs out first and the yield is 72.06 g of water.
The yield assumes the equation is balanced and the reaction goes to completion, so measured yields come out lower.
Nguồn đối chiếu: Python 3.8 decimal: 36.03 / 18.015 = 2; × 6.02214076e23 (IUPAC 2021 weights)
Nguồn đối chiếu: SI 2019 definition of the mole (Avogadro constant exact); standard atomic weight of carbon 12.011 (IUPAC 2021)
Nguồn đối chiếu: Python 3.8 decimal: 0.25 × 58.44
Nguồn đối chiếu: Python 3.8 decimal: 3.011e23 / N_A = 0.4999883; × 44.009 g/mol
Divide the mass in grams by the molar mass in g/mol: n = m/M. Water has a molar mass of 18.015 g/mol, so 36.03 g of water is 36.03 ÷ 18.015 = 2 mol. To go back, multiply moles by the molar mass. The molar mass is the sum of the atomic weights in the formula, which the calculator adds up from IUPAC 2021 values.
It is the number of particles in one mole: exactly 6.022 140 76 × 10²³ per mole since the 2019 revision of the SI, which defines the mole by fixing this constant. One mole of carbon therefore contains 6.022 140 76 × 10²³ atoms and weighs 12.011 g. Multiply an amount in moles by this number to get molecules, atoms or formula units.
Convert each reactant's mass to moles, then divide by its coefficient in the balanced equation; the reactant with the smaller result runs out first. For N₂ + 3 H₂ → 2 NH₃ with 28 g of N₂ and 6 g of H₂, nitrogen gives 0.9995 mol ÷ 1 = 0.9995 and hydrogen gives 2.976 mol ÷ 3 = 0.992, so hydrogen limits the yield to 33.79 g of ammonia.
Theoretical yield is the product mass if the limiting reagent reacted completely, which is what this calculator reports. Percent yield compares what you actually collected: actual ÷ theoretical × 100. With a theoretical yield of 72.06 g of water and 65.0 g collected, the percent yield is 90.2 %. Transfer losses, side reactions and incomplete reaction keep real yields below 100 %.
Độ chính xác phụ thuộc vào dữ liệu nhập và giả định của phương pháp. Phép tính thập phân dùng 50 chữ số có nghĩa, nhưng ước lượng, phương pháp số và dữ liệu nguồn có thể kém chính xác hơn; làm tròn khi hiển thị không loại bỏ các giới hạn đó. Ví dụ có lời giải đã đối chiếu với nguồn độc lập: 7. Ví dụ, “36.03 g of water is 2 mol” được kiểm tra bằng Python 3.8 decimal: 36.03 / 18.015 = 2; × 6.02214076e23 (IUPAC 2021 weights).
CODATA 2022 / SI 2019 — Avogadro constant N_A = 6.022 140 76 × 10²³ mol⁻¹ (exact); OpenStax Chemistry 2e, §4.4 Reaction yields (limiting reactant, theoretical yield).
Công cụ tính này có 7 ví dụ đã giải với đáp án từ các nguồn độc lập. Chúng được chạy trong bộ kiểm thử và bạn cũng có thể chạy tại đây.
Molar mass in g/mol and mass percent composition of any chemical formula, with brackets and hydrates such as CuSO4·5H2O, from IUPAC 2021 atomic weights.
Solve C₁V₁ = C₂V₂ for any dilution variable, get molarity, % w/v and ppm from a weighed mass, the mass to weigh for a solution, or molality.
Solve the ideal gas law PV = nRT for pressure, volume, moles or temperature in any units, or find a new state with the combined gas law.
Calculate pH, pOH, [H⁺] and [OH⁻] from a concentration, a strong acid or base, a weak acid's Ka or pKa, or a Henderson–Hasselbalch buffer.