주파수 변환기

Convert rpm to Hz, Hz to rpm, BPM to Hz, GHz to MHz and hertz to radians per second (ω = 2πf), from Hz to THz.

업데이트 검증한 예제: 4

변환 전 단위의 숫자 또는 단위가 붙은 숫자를 입력하세요
시도하기
변환된 값
Hz
변환된 값: 50 Hz
유효 자릿수: 12; 가장 가까운 값, 중간값은 0에서 먼 쪽으로
단위 변환
3,000 rpm = 50 Hz
변환 계수
0.0166666666667
정확성
정확함

3,000 rpm은(는) 정확히 50 Hz입니다. revolution per minute 한 단위는 약 0.01666667 Hz입니다.

같은 양을 각 단위로 표시

rpm3,000 rpmHz50 Hz
3,000 rpm을(를) 모든 주파수 단위로 표시 행 수: 8
단위값정의
hertz (Hz)50기본 단위
kilohertz (kHz)0.051 kHz = 1,000 Hz, 정확한 값
megahertz (MHz)0.000051 MHz = 1,000,000 Hz, 정확한 값
gigahertz (GHz)5 × 10⁻⁸1 GHz = 1,000,000,000 Hz, 정확한 값
terahertz (THz)5 × 10⁻¹¹1 THz = 1,000,000,000,000 Hz, 정확한 값
revolution per minute (rpm)3,0001 rpm = 1/60 Hz, 정확한 값
beat per minute (BPM)3,0001 BPM = 1/60 Hz, 정확한 값
radian per second (rad/s)314.15931 rad/s = 1/(2π) Hz, 정확한 값
계산 방법 S
  1. revolution per minute에서 hertz(으)로 변환

    3,000 rpm×160 Hzrpm=50 Hz3{,}000\ \text{rpm} \times \tfrac{1}{60}\ \tfrac{\text{Hz}}{\text{rpm}} = 50\ \text{Hz}

    1 rpm = 1/60 Hz, 정확한 값

    두 단위가 모두 정확하게 정의되어 있고 변환된 값이 유한소수이므로 표시된 모든 자릿수가 정확합니다.

주파수 변환기 소개

One hertz is one cycle per second, so revolutions per minute and beats per minute divide by 60 to give hertz, and the SI prefixes step by 1,000 from kHz to THz. Angular frequency in radians per second is ω = 2πf, so 1 Hz is 6.2832 rad/s; conversions to or from rad/s involve π and are shown to 12 significant figures.

The default converts 3,000 rpm to 50 Hz, the speed of a two-pole motor on a 50 Hz supply. Musicians convert tempo the same way (120 BPM is 2 Hz), and radio users move between MHz and GHz: 2.4 GHz Wi-Fi is 2,400 MHz.

Rpm and BPM count whole cycles per minute, while rad/s counts the angle swept per second. A cycle is 2π radians, so 60 rpm is 1 Hz and 6.2832 rad/s.

계산 예제

3000 rpm in Hz

값
3000 rpm
변환 전
revolution per minute (rpm)
변환 후
hertz (Hz)
변환된 값
50 Hz

검증 출처: 3000 / 60 = 50

120 BPM in Hz

값
120 BPM
변환 전
beat per minute (BPM)
변환 후
hertz (Hz)
변환된 값
2 Hz

검증 출처: 120 / 60 = 2

1 Hz in rad/s

값
1 Hz
변환 전
hertz (Hz)
변환 후
radian per second (rad/s)
변환된 값
6.2831853072 rad/s
정확성
정의는 정확하며 π가 포함됨

검증 출처: ω = 2πf = 6.28318530717958647… (Python decimal)

2.4 GHz in MHz

값
2.4 GHz
변환 전
gigahertz (GHz)
변환 후
megahertz (MHz)
변환된 값
2,400 MHz

검증 출처: 2.4 × 1000

자주 묻는 질문

How do I convert rpm to Hz?

Divide by 60, because hertz counts cycles per second and rpm cycles per minute. 3,000 rpm is 50 Hz, 1,800 rpm is 30 Hz, and 7,200 rpm, a common hard-drive speed, is 120 Hz. To go from Hz to rpm, multiply by 60.

Why does a motor run at 3,000 or 3,600 rpm?

Because its speed is locked to the supply frequency. A synchronous motor turns at 120 × f ÷ p rpm, where p is the number of poles, so a two-pole motor runs at 3,000 rpm on 50 Hz mains and 3,600 rpm on 60 Hz. Induction motors run a few percent below this synchronous speed, for example 2,900 rpm on 50 Hz.

How do I convert Hz to rad/s?

Multiply by 2π, about 6.28319: ω = 2πf. 50 Hz is 314.16 rad/s and 1 Hz is 6.2832 rad/s. Both units reduce to “per second”, but a hertz counts whole cycles while a radian per second counts the angle swept, and one cycle is 2π radians.

How many Hz is 120 BPM?

2 Hz: 120 beats ÷ 60 seconds. Tempo in beats per minute converts to hertz by dividing by 60, so 90 BPM is 1.5 Hz. The same rule applies to heart rate: the American Heart Association's normal adult resting range of 60 to 100 beats per minute is 1 to 1.67 Hz.

How many MHz are in a GHz?

1,000. SI prefixes step by 1,000: 1 GHz = 1,000 MHz = 1,000,000 kHz = 10⁹ Hz. Wi-Fi's 2.4 GHz band is 2,400 MHz, and a 3.5 GHz processor clock ticks 3.5 billion times a second. Frequency prefixes are always decimal, never the binary 1,024 used for some memory sizes.

“주파수 변환기”의 정확도는 어느 정도인가요?

정확도는 입력값과 계산 방법의 가정에 따라 달라집니다. 십진 연산은 유효숫자 50자리를 사용하지만, 추정값·수치해석 방법·원본 데이터의 정밀도는 더 낮을 수 있습니다. 표시값을 반올림해도 이러한 한계는 사라지지 않습니다. 독립적인 출처의 풀이와 대조한 계산 예시: 4. 예를 들어 “3000 rpm in Hz”은 3000 / 60 = 50와 대조해 확인합니다.

이 계산 방법의 출처는 무엇인가요?

NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors; NIST Handbook 44, Appendix C — General tables of units of measurement.

이 계산기 소개

xto=xfrom×ffromftof=one unit expressed in Hz\begin{gathered} x_{\text{to}} = x_{\text{from}} \times \dfrac{f_{\text{from}}}{f_{\text{to}}} \\ f = \text{one unit expressed in } \text{Hz} \end{gathered}

출처

  1. NIST SP 811 (2008), Guide for the Use of the SI, Appendix B — conversion factors
  2. NIST Handbook 44, Appendix C — General tables of units of measurement

출처와 대조하여 검증

이 계산기에는 독립적인 출처에서 답을 얻은 계산 예제가 4개 있습니다. 테스트 모음에서 실행되며 여기에서도 실행할 수 있습니다.

관련 계산기