Tile calculator: tiles and boxes for a floor or wall from room size, tile size, grout joint and waste allowance, plus grout in litres and kg.
अपडेट किया गया जाँचे गए उदाहरण: 3
12 m² takes about 65.7 tiles laid edge to edge; with 10% for cuts and breakage buy 73 tiles, which is 10 boxes of 8. The joints need about 2.6 kg of grout.
Rounded up to whole tiles.
Rounded up to whole boxes.
Lengths in mm give litres of joint per m². 1.6 kg/L is Mapei's factor for cementitious grout; the estimate has no waste added.
The tile count is the area divided by the area one tile covers with its grout joint, (tile length + joint) × (tile width + joint). A waste allowance for cuts and breakage is added, then the count is rounded up to whole tiles and whole boxes. Grout volume per m² is (A + B) ÷ (A × B) × tile thickness × joint width, with A and B the tile sides and all four in millimetres.
The default 4 × 3 m floor in 600 × 300 mm tiles with 3 mm joints takes 65.7 tiles laid edge to edge. With 10% waste that is 73 tiles, or 10 boxes of 8, plus 1.62 L of grout (2.6 kg).
The waste presets are this calculator's rules of thumb: 10% for a straight lay, 15% for diagonal and 20% for herringbone, which cut more tiles at the edges. The drawing shows a straight lay.
जाँच का स्रोत: Python decimal: 12 ÷ (0.603 × 0.303) = 65.68 × 1.1 = 72.25 → 73; grout (900/180000) × 9 × 3 × 12 = 1.62 L × 1.6 kg/L (Mapei formula); 10 boxes × 40 = 400
जाँच का स्रोत: Python decimal: 120 ft² ÷ (12.125 in)² = 117.54 × 1.15 = 135.17 → 136 tiles → 14 boxes of 10; Mapei grout formula in mm
जाँच का स्रोत: Hand calculation: 3 m ÷ 0.3 m = 10 tiles each way = 100 tiles, 10 boxes; a zero-width joint needs no grout
Divide 1 m² by the area of one tile plus its joint. A 600 × 300 mm tile with a 3 mm joint covers 0.603 × 0.303 = 0.1827 m², so 1 m² takes 5.47 tiles; 300 × 300 mm tiles take 10.89. Multiply by the whole area before rounding up: rounding 5.47 up to 6 per m² would overbuy by about 10%.
About 98 twelve-inch tiles before waste. A 12 × 12 in tile with a ⅛ in joint covers 12.125 × 12.125 in, or 1.021 ft², so 100 ft² takes 97.95 tiles. Adding 10% for cuts and breakage gives 107.7, rounded up to 108 tiles.
This calculator's presets add 10% for a straight lay, 15% for a diagonal lay and 20% for herringbone, because angled layouts cut more tiles along every wall. On the default 12 m² floor those give 73, 76 and 79 tiles of 600 × 300 mm.
Multiply (A + B) ÷ (A × B) by tile thickness and joint width, all in mm, to get litres of joint per m². For 600 × 300 mm tiles 9 mm thick with 3 mm joints that is 900 ÷ 180,000 × 9 × 3 = 0.135 L per m², or 1.62 L for 12 m². The calculator converts at 1.6 kg per litre; check the grout bag's own coverage table.
Yes, they lower it slightly, because each tile plus its joint covers more floor. A 600 × 300 mm tile covers 0.18 m² on its own and 0.1827 m² with a 3 mm joint, so 12 m² needs 65.7 tiles instead of 66.7 before waste. For 50 × 50 mm mosaic with 3 mm joints, each tile's footprint grows by 12.4%.
सटीकता आपके इनपुट और विधि की मान्यताओं पर निर्भर करती है। दशमलव गणना 50 सार्थक अंकों का उपयोग करती है, लेकिन अनुमान, संख्यात्मक विधियाँ और स्रोत डेटा कम सटीक हो सकते हैं। दिखाए गए मानों को पूर्णांकित करने से ये सीमाएँ दूर नहीं होतीं। स्वतंत्र स्रोतों के हल किए गए उदाहरणों से जाँच: 3। उदाहरण के लिए, “4 × 3 m floor, 600 × 300 mm tiles, 3 mm joints, 10% waste” की जाँच Python decimal: 12 ÷ (0.603 × 0.303) = 65.68 × 1.1 = 72.25 → 73; grout (900/180000) × 9 × 3 × 12 = 1.62 L × 1.6 kg/L (Mapei formula); 10 boxes × 40 = 400 से की गई है।
Mapei grout calculator — consumption (A + B)/(A × B) × C × D × 1.6 = kg/m²; TCNA Handbook for Ceramic, Glass, and Stone Tile Installation — joint widths and layouts.
इस कैलकुलेटर में स्वतंत्र स्रोतों के उत्तरों वाले 3 हल किए गए उदाहरण शामिल हैं। ये परीक्षण समूह में चलते हैं और आप इन्हें यहाँ भी चला सकते हैं।
Floor area in square metres and square feet, wall area, perimeter and volume for one or more rectangular rooms or an L-shaped room.
Calculate concrete volume and bags for slabs, footings, columns or steps. Compare bag and ready-mix quotes with delivery fees, minimums and order increments.
Deck boards, joists and screws or hidden clips for a rectangular deck, from its size, joist spacing, board width, gap and waste allowance.
Paint calculator: litres, US gallons and whole cans of paint and primer for a room, from wall area minus doors and windows, coats and coverage.
Drywall sheets for a room's walls and ceiling after doors and windows, with screws, joint tape and compound, for 4 × 8 ft or metric plasterboard.
Wallpaper calculator: rolls to buy from wall width and height, roll size, pattern repeat and trimming, counted as full-height drops per roll.